Mold Temperature Controller
Product ID: TOH Series
The oil circulation mold temperature controller is major for controlling the temperature of the mold in the plastic injection molding machine.
- The temperature control adopted micro processor (P.I.D) touching type ,there is stored automatic calculation inside, precise and reliable, it can control within ± 1°C and save electricity over 35%.
- Medium circulation pipe with stainless steel.
- All series adopting speck pump from Germany.
- Circuit beaker.
- Motor reverse protective lamp.
- Oil shortage protective lamp.
- Pump overload protective lamp.
- Overheat Thermostat protective lamp.
- By-Pass system.
- Buzzer.
- Inlet temperature digital display gauge.
- Phase failure protecter.
- OEM/ODM Product
- Branded Product
- Buyer's Label Offered
- CE
| Model | TOH-300(4HP) |
|---|---|
| Temp. Control Range | 60 ~ 300°C |
| Temp. Control Accuracy | ± 1°C |
| Temp. Control Method | Double proportional integral derivative |
| Power | 3Ø 220V 60Hz (or other) |
| Heat Transfer Medium | Heat Transfer Oil |
| Cooling Method | Indirect Cooling |
| Heating Capacity | 12 + 12 Kw |
| Pump Power | 4 HP |
| Max Pump Flow | 100 l/min |
| Max. Pump Pressure | 13 kg/cm² |
| Expansion Tank Capacity | 30 liter |
| Cooling Water Pipe | 1/2" |
| Circulation Water Pipe | 1" x 4" |
| Machine Size | 1,050 x 450 x 1,150 mm |
| Weight | 130 Kg |
Main Products:
Injection Molding Robot, Sprue Picker, Grusher, Grinder, Granulator, Conveyor, Mold Temperature Controller, Chiller, ProportionalMixers, Mixer, Blenders, De-Power, Auto Loader, Drawer Type Mold Rack, Dehumidifying Material Dryer, Compressed Air Dryer, Automation Auxiliary Equipments For Plastic Inje
Related Products
Contact Details
CEO: Mr. Hankun Chang
Sales Contact: Ms. Elsa Hsieh
Minimum Order:1 Set
FOB:Taiwan
Address:No.27 , Lane 1 , Beinei St. , Shu-Lin City , Taipei , 238 , Taiwan
Tel:886-2-26826777
Fax:886-2-26826778
E-mail:
wedlon@wedlon.com.tw