Compressed Air Dryer
Product ID: HA/NA Series
Compressed Air Dryer is mainly used for removing the moisture from the compressed air.
- Installing a Pre-cooler first compressed air enter there for cool compressed air before it enter the evaporator, (HA Series Only has.)
- Non-fouling heat exchanger maintain performance heat-exchanger efficiency and low pressure drop for the life of the unit; are fully insulated to preserve cooling effectiveness.
- High quality refrigeration controls produce consistent cooling temperatures over a wide range of flow and operating conditions.
- Separator maintains high efficiency from no flow to full flow.
- Durable condensate drain automatically collects and discharges condensate from the system.
- All electrical controls and safety devices to start and protect compressor and fan motor.
- Refrigeration system is built under strict quality control procedures by experienced craftsmen and includes all. The filter and over loads necessary to ensure long trouble free service.
- OEM/ODM Product
- Branded Product
- Buyer's Label Offered
- CE
| MODEL | 5 HA/NA | 10 HA/NA | 15 HA/NA | 20 HA/NA | 30 HA/NA | 50 HA/NA | 75 HA/NA | 100 HA/NA |
|---|---|---|---|---|---|---|---|---|
| Flow Rate (Nm³/min) | 0.6 | 1.3 | 1.8 | 2.8 | 4.2 | 7 | 10.6 | 14.5 |
| Flow Rate (SCFM) | 21 | 46 | 64 | 99 | 148 | 247 | 375 | 512 |
| Inlet Air Temp. | Working: 80°C(HA) / 45°(NA) | Working: 80°C(HA) / 45°(NA) | Working: 80°C(HA) / 45°(NA) | Working: 80°C(HA) / 45°(NA) | Working: 80°C(HA) / 45°(NA) | Working: 80°C(HA) / 45°(NA) | Working: 80°C(HA) / 45°(NA) | Working: 80°C(HA) / 45°(NA) |
| Environment Temp. | Working: 38°C | Working: 38°C | Working: 38°C | Working: 38°C | Working: 38°C | Working: 38°C | Working: 38°C | Working: 38°C |
| Pressure Dew Point | 2 ~ 10 °C | 2 ~ 10 °C | 2 ~ 10 °C | 2 ~ 10 °C | 2 ~ 10 °C | 2 ~ 10 °C | 2 ~ 10 °C | 2 ~ 10 °C |
| Working Pressure | Working: 7 Kgf/c m² | Working: 7 Kgf/c m² | Working: 7 Kgf/c m² | Working: 7 Kgf/c m² | Working: 7 Kgf/c m² | Working: 7 Kgf/c m² | Working: 7 Kgf/c m² | Working: 7 Kgf/c m² |
| Refrigerant | R134a | R134a | R134a | R134a | R134a | R134a | R22(R134a) | R22(R134a) |
| Power Supply | Iphase 220v | Iphase 220v | Iphase 220v | Iphase 220v | Iphase 220v | Iphase 220v | 3phase 220/380/440v | 3phase 220/380/440v |
| Compressor Motor (HP) | 1/5 | 1/3 | 1/2 | 3/4 | 1 | 11/2 | 2 | 3 |
| In / Oulet Conn. | 1/2" | 3/4" | 3/4" | 1" | 11/2" | 2" | 21/2" | 3" |
| Physical Dimension (mm) Height | 460 / 390 mm | 600 / 600 mm | 650 / 600 mm | 760 / 650 mm | 750 / 750 | 770 / 800 | 1200 / 1000 | 1200 / 1000 |
| Physical Dimension (mm) Width | 470 / 350 mm | 350 / 350 mm | 350 / 350 mm | 400 / 350 mm | 400 / 400 | 500 / 500 | 700 / 700 | 700 / 700 |
| Physical Dimension (mm) Depth | 500 / 400 mm | 640 / 640 mm | 770 / 640 mm | 820 / 770 mm | 920 / 920 | 995 / 920 | 1270 / 1270 | 1270 / 1270 |
| Net Weight (Kg) | 27 / 22 | 45 / 45 | 50 / 45 | 70 / 60 | 95 / 90 | 130 / 105 | 210 / 160 | 270 / 220 |
Main Products:
Injection Molding Robot, Sprue Picker, Crusher, Grinder, Granulator, Conveyor, Mold Temperature Controller, Chiller, Proportional Mixer, Mixer, Blenders, De-Powder, Auto Loader, Drawer Type Mold Rack, Dehumidifying Material Dryer, Compressed Air Dryer, Automation Auxiliary Equipments For Plastic Inj
Contact Details
CEO: Mr. Hank Chang
Sales Contact: Mr. Hank Chang
Minimum Order:1 Set
FOB:Taiwan
Address:No.27 , Lane 1 , Beinei St. , Shu-Lin Area, Shin Pei City 238 , Taiwan
Tel:886-2-26826777
Fax:886-2-26826778
E-mail:
wedlon@wedlon.com.tw
