4 side moulder, 4-side moulder
Online 
STANDARD CONFIGURATION
1.This adopts step-less material feeding, material feeding speed ranges from 7m/min to 28m/min.
2.Each principal axis adopts independent drive to electric motor, features stronger cutoff force.
3.Adjusts for principal axis integrates at central or frontal side, features easy operation.
4.Galvanized workstation features superior abrasion resistance.
5.Equips with auxiliary unit alarming lack of material, it effectively improves smooth feed-in while lack of
material.
6.Active roller below improves feeding efficiency.
7.Pneumatic pressing feeding roller section by section adjusts for pressing force, it favors for smooth feed-in of
different thicknesses of timber.
8.Adopts central charging system, features convenience and promptness.
9.Equips with world-class electric element, features superior stability.
10.With fully sealed safety protective cover, this effectively avoids flying logging debris and noise blocked, and even acts as safety protection.
4 side moulder, 4-side moulder
| Machine Parameter | |
|---|---|
| Working Width | 25-230 mm |
| Working Thickness | 8-150 mm |
| Working Table Length | 1950 mm |
| Feeding Speed | 7-28 m/min |
| Main Shaft Diameter | 40 mm |
| Main Shaft Revolution | 6000 r/min |
| Pneumatic Source Pressure | 0.6 MPa |
| Motor Power | |
| 1st Lower Shaft | 7.5KW/10HP |
| Right Vertical Shaft | 7.5KW/10HP |
| Left Vertical Shaft | 7.5KW/10HP |
| 1st Upper Shaft | 11KW/15HP |
| 2nd Upper Shaft | 7.5KW/10HP |
| 2nd Lower Shaft | 7.5KW/10HP |
| Horizontal Lifting | 0.75KW/1HP |
| Feeding Motor | 5.5KW/7.5HP |
| General Power | 54.75KW/73HP |
| Cutter Diameter /mm | |
| 1st Lower Shaft | φ125 mm |
| Right Vertical Shaft | φ125~φ180 mm |
| Left Vertical Shaft | φ125~φ180 mm |
| 1st Upper Shaft | φ125~φ180 mm |
| 2nd Upper Shaft | φ125~φ180 mm |
| 2nd Lower Shaft | φ125~φ180 mm |
| Remarks/mm | |
| Feeding Wheel Diameter | φ140 mm |
| Dust outlet Diameter | φ140 mm |
| Physical Dimension | 4168×1635×1735 mm |
Main Products:
Woodworking Machinery, Metalworking Machinery, Aluminum Machinery
