Misting System

Product ID: WM-1003-5M Series ; 1~5 l/min, 70 bar

Send Inquiry
Professional High Pressure Fogging Pump


Features:

  • 1000 psi operating pressure for optimal misting effect using the narrowest orifice nozzles.
  • Nickel-plated forged brass manifold resists rust and corrosion.
  • Patented internal rinse cooling design to increase pump life.
  • Dual bearing design to lower the heat and noise level down to 75 dB.
  • Automatic pressure valve controls the consistency of the pump pressure.
  • Circuit breaker for electrical safety if the voltage is outside of the safety parameter.
  • 24-hour timer with 8 settings for minutes and seconds to set the misting intervals as well as pressure release.
  • Inlet filter system increases the pump's life and reduces clogged nozzles.
  • Choose either Wuli's patented stainless steel pipe or high-pressure hose for quick installation and high durability.
  • Available in 60HZ/220V and 50HZ/230V



    Applications:

  • Residential cooling
  • Industrial cooling
  • Commercial cooling
  • Agriculture and greenhouse use
  • Special landscaping effects
  • Dust/odor control
  • Air condition condenser pre-cooling
  • Motor WM-1002-5M WM-1003-5M WM-1004-5M WM-1002-6M WM-1003-6M WM-1005-6M
    Motor Power - HP 1 1 1 3/4 3/4 1
    Motor Power - Volt/Hz 230V/50Hz 230V/50Hz 230V/50Hz 220V/60Hz 220V/60Hz 220V/60Hz
    Motor Power - Φ 1 1 1 3/4 3/4 1
    Motor Power - R.P.M 1450 1450 1450 1150 1150 1750
    Suction Volume L/Min 1.7 2.7 4.4 2.1 3.5 5.3
    Suction Volume gpm 0.44 0.71 1.15 0.55 0.92 1.39
    Nozzles (0.15mm) 20~31 32~51 52~84 25~39 41~66 63~100
    Working Pressure 1000 p.s.i. / 70kgf/cm² 1000 p.s.i. / 70kgf/cm² 1000 p.s.i. / 70kgf/cm² 1000 p.s.i. / 70kgf/cm² 1000 p.s.i. / 70kgf/cm² 1000 p.s.i. / 70kgf/cm²
    Dimension 43x31x30 43x31x30 43x31x30 43x31x30 43x31x30 43x31x30
    Weight 29 kgs 29 kgs 29 kgs 29 kgs 29 kgs 29 kgs

    Main Products

    Misting Fan, Misting System

    Contact Detail