Product ID: YC-160, 180, 220, 250

Slitting Line - Automatic Steel Sheet Slitting Machine

We offer 4 standard models of slitting lines. The various lines cut from 0.2mm up to 6mm with different coil widths and weights. Each of this line can be custom tailored to meet specific production needs.

Ferrous and non-ferrous metals such as cold or hot rolled carbon steel, stainless steel, aluminum, brass, copper, galvanized and different kind of special alloys can be slit by these lines.

Our mission is maximizing your productivity.

Click here for details.

Features:

• Features for Automatic Slitter Line:
• By means of programmable logic controller (PLC), system performance is based upon the characteristics of various metal sheets, and switches high / low speed operating mode quaomatically, so as to achieve improved efficiency and reduced maintenance dramatically.
• For lower malfunctioning, the material uncoiler uses an expand / shrink hydraulic cylinder that is mounted on an integrated steel frame.
• The materialuncoiler is equipped with a high efficiency disctype brake, its tension is adjusted by the air-pressure loop. Under this circumstance, the time for tension adjustment is reduced, also, the forced monetary braking is occurred thus free from loosen of coil.
• The pre-loader is equipped with DC various-speed motor drive, so that a synchronized speed corporate to the production line could be governed.
• Slitting knives are mounted on an integrated frame with a separated transmission, that means enhanced rigidity structure of machine, lower vibration amplitude of knives, and excellent yields could be produced.
• The datum plane and accuracy of slitting knives' axes are all to be fabricated within 0.006mm. in tolerance, so that makes higher duration of slitting knives and much excellent accury of outputs of the slitting line.
• For securing the stability of slitting line during operation, the tension controlled roll-up device with slip-differential structure is designed for the waster.
• The straight type tightener uses high elastics and resistive carpet as surface materials, so keep the outputs of the line smoother. In addition, it also equipped a pressure-balance device to keep an even-pressure over the both side of materials that touched with the tightener.
• The Recoiler is equipped with an improved / high rigid holder, that causes reduced of lead time. An air-pressure adjustable back-pressure device is equipped on the separator mechanism, so that a constant hold-pressure could be reached for recoil.
• Self-tension design enable to retain a better tightness during recoil.

Certificate: ISO 9002

• Minimum Order: Negotiable
• FOB: Taiwan
• TEL: 886-4-8224845
• FAX: 886-4-8232882
• E-mail: yc.steel@msa.hinet.net