Our multiple-purpose mono-layer casting film is designed to produce many uses of film. Featuring high mechanical and assembly accuracy to ensure the stable, high performance of each component, this equipment can manufacture thin as well as thick films and can produce variable film types for a truly impressive range of application. Material is extruded from 'COATHANGER' die and hauled thru a series of rolls into a piece of casting film
Specifications:
- CPE 100T1300
- Production:PE Embossing Film
- Max. Width:1200m/m
- Film Thick:0.03~0.25m/m
- Max. Output/hr.:120~180kg
- Installed Power:166kw
- Estimated Running Consumption:116kw
- EXTRUDER
- Type:NON-VENTED TYPE HIGH BASEMENT EXTRUDER
- Screw Dia.:100m/m
- L/D:30/1
- Screw Speed:0~100 r.p.m.
- Material of Screw:SCM-440 alloy steel with nitrided, hard-chromed treatments.
- Material of Barrel:SACM-645 alloy steel with polished, nitrided
- Heating Capacity:35.2kw
- Temperature Control:5
- Barrel Cooling:1/8 HP Blower x 5
- MAIN DRIVING MOTOR:100HP,DC
- SCREEN CHANGER
- Type:HYDRAULIC OPERATING SYSTEM, SLIDING PLATE TYPE
- Hydraulic Pack:3HP
- T-DIE
- Die Width:1300m/m
- Die Lip:0.8m/m
- Temperature Control:7
- Heating Capacity:28kw
- ROLL STACK
- Type:3 ROLLERS IN HORIZONTAL POSITION
- Chill Roller:300m/m x 1500m/m x 1
- Silicon Roller:200m/m x 1500m/m x 1
- Embossing Roller:450m/m x 1500m/m x 1
- Take-up Rooler:160m/m x 1500m/m x 2
- Expansion Roller:125m/m x 1500m/m
- Tension Controller:JAPAN MADE, TC40 x 1 SET
- Slitting & Edge Trimming Device:IN-LINE OPERATION SYSTEM
- TENSION WINDER
- Type:Turret tumbling tension controlled winder, film cut-off by hot wire at pre-set target film length and Reel-Change automatically.
- Driven Motor(Winding):2HP DC with 1/20 reducer x 2 sets
- Winding Speed:0-60 M/min
- EDGE SCRAP RECYCLING UNIT
- Type & Operation Method:Spooled winder unit x 2 sets trimmed scrap being compressed, crushed and fed into extruder by 3HP centrifugal blower for reclamation.
- WATHER CHILLER
- Power:3.75kw x 2 sets
- Pipe Size:1 1/2"
- BTU:119400(10RT)
- CONTROL PANEL
- Type:Isolated type with complete instrumentation and wiring.
- OPTIONAL ITEMS:1HP Auto Loader, 3HP Air Compressor.
- *********************************************************************
- YE I Reserves The Right To Change Specifications Or Materials For Improvement Without Prior Notification.
- CPE 120T2500
- Production:PE Embossing Film
- Max. Width:2000m/m
- Film Thick:0.03~0.25m/m
- Max. Output/hr.:180~240kg
- Installed Power:210kw
- Estimated Running Consumption:150kw
- EXTRUDER
- Type:NON-VENTED TYPE HIGH BASEMENT EXTRUDER
- Screw Dia.:120m/m
- L/D:30/1
- Screw Speed:0~100 r.p.m.
- Material of Screw:SCM-440 alloy steel with nitrided, hard-chromed treatments.
- Material of Barrel:SACM-645 alloy steel with polished, nitrided
- Heating Capacity:54kw
- Temperature Control:6
- Barrel Cooling:1/8 HP Blower x 6
- MAIN DRIVING MOTOR:150HP,DC
- SCREEN CHANGER
- Type:HYDRAULIC OPERATING SYSTEM, SLIDING PLATE TYPE
- Hydraulic Pack:3HP
- T-DIE
- Die Width:2150m/m
- Die Lip:0.8m/m
- Temperature Control:11
- Heating Capacity:41.8kw
- ROLL STACK
- Type:3 ROLLERS IN HORIZONTAL POSITION
- Chill Roller:350m/m x 2500m/m x 1
- Silicon Roller:300m/m x 2500m/m x 1
- Embossing Roller:450m/m x 2500m/m x 1
- Take-up Rooler:200m/m x 2500m/m x 2
- Expansion Roller:125m/m x 2500m/m
- Tension Controller:JAPAN MADE, TC40 x 1 SET
- Slitting & Edge Trimming Device:IN-LINE OPERATION SYSTEM
- TENSION WINDER
- Type:Turret tumbling tension controlled winder, film cut-off by hot wire at pre-set target film length and Reel-Change automatically.
- Driven Motor(Winding):3HP DC with 1/20 reducer x 2 sets
- Winding Speed:0-60 M/min
- EDGE SCRAP RECYCLING UNIT
- Type & Operation Method:Spooled winder unit x 2 sets trimmed scrap being compressed, crushed and fed into extruder by 3HP centrifugal blower for reclamation.
- WATHER CHILLER
- Power:5kw x 2 sets
- Pipe Size:1 1/2"
- BTU:176925(15RT)
- CONTROL PANEL
- Type:Isolated type with complete instrumentation and wiring.
- OPTIONAL ITEMS:1HP Auto Loader, 3HP Air Compressor.
- *********************************************************************
- YE I Reserves The Right To Change Specifications Or Materials For Improvement Without Prior Notification.
- Minimum Order: Negotiable
- TEL: 886-6-2536066
- FAX: 886-6-2543717
- E-mail: service@yei.com.tw