RLMK-1 attends to mark elements on cylindrical parts and strip shape for continuous marking. Machine is constructional strictly、function completely, excellent parts. It can still keep in accuracy after long time operation.Adopted humanized design, operated easily, including many products for marking. Even often changed different type, it is easy as well. The excellence of marking quality and efficiency was always kept in procedure.Alphabet mold was made of rubber, low price and short lead time. Also it could change the cycle partially to achieve better management conditions. The newest ink reservoir issued is easy to adjust. Change different ink mold accords to different colors under standard conditions.Above all, involved ink system, ink average spreading, mold contact with rotary wheel etc. All these conditions were designed and become easier than before.The principle of producer to manage is that replace reservoir modular but do not need to adjust.Both of off line and on line operated are suitable, it could be controlled by external signal.
Others:
| Model Name | RLMK-1 |
|---|---|
| Power Supply | I/P: 100-240VAC, 47-63Hz, 1.9AmpO/P: 24V, 3.33Amp max |
| Dimensions (LxWxH) | 210*280*485 mm |
| Ink | UV Ink, Oven heat Ink |
| Minimum Character Size | Height 0.7mm |
| Marking Area | ø8~ø85mm W≤75mm Θ=10~300°(Accept special specification) |
| Marking Speed | 50 cycles/min(not including loading and unloading)75m / min(for slender elements) |
| Weight | 30 kg |
| - | Air Source must be 4.0 Kgf/cm² necessary |
Ordering information:
- Minimum Order: Negotiable