| No. | Item | Standard |
| 1 | Type | DFC: drip-proof, forced cooling, stabilized shunt |
| 2 | Output | 0.37KW~335KW |
| 3 | Base speed | Standard: 1750rpm, 1150rpm.(other rpm on request) |
| 4 | Frame No. | F#90~F#315 |
| 5 | Standards | Outline dimension: JEM 1170-1979. Frame assignment: pine standard. Characteristics: JIS, JEC, JEM |
| 6 | Armature voltage | 190VDC: 0.37KW~3.7kW; 230V/380V/460VDC: 5.5KW depend on different type |
| 6 | Field voltage | 160VDC~280VDC depend on different type |
| 7 | Speed control range | CONST, torque control, 20:1(CONST, power control on request) |
| 8 | Protection | IP23: drip-proof, reset larger than 12mm solid and drips from 15deg by vertical into motor |
| 9 | Cooling | IC06: motor-fan forced cooling |
| 10 | Mounting | IM1001: horizontal foot mounted, single shaft |
| 11 | Time rating | Continuous rating |
| 12 | Outline dim | Refer outline dimension drawing |
| 13 | Insulation | F#200 & below: B class; F#225 and above: F class |
| 14 | Tacho-generator | F# 225 & below: mount type 1dia. AC 48P, 20V/1000RPM; F# 250 & above: stand type 1dia. AC 48P, 20V/1000RPM. |
| 15 | Thermostat | B class: 120 Celsius 1b 1pcs, F class: 145 Celsius 1b 1pcs. |
| 16 | Force cooling | Motor fan without air filter: suitable F# 160 & below; motor fan with air filter: suitable F# 180 and above |
| 17 | Painting | Munsell 7.5BG4/2 |
| 18 | Excitation | Stabilized shunt |
| 19 | Temperature raise | JEM1170-1979, B class: resistance method |
