Product ID: ASL-24MII

Auto Sheet Laminator

SOMAR's ASL-24M II is an advanced version of ASL-24. ASL-24M II enhances clean laminations, strong adhesions, user-friendly operation and high productivity. Rotary cutters are installed in the machine in order to meet the demand for clean laminations required by the PWB production technology. Rotary cutters increase the yield by minimizing a generation of resist-chips. Super-laminator with a servomotor control, mechanical link system, monitoring LCD, 6m/min. (optional) lamination...

• Panel size
• Width: 250mm ~ 650mm
• Length: 200mm ~ 610mm
• Thickness: 0.15mm ~ 4.0mm (includes coppers)
• Film size
• Width: 235mm ~ 640mm
• Length: ~ 1,000 feet
• Thickness: 15 ~ 76Mum
• Core: 3 inches, 6 inches
• Entrance conveyor: slide type, timing belt drive
• Speed display: digital display (changeover to lamination, speed)
• Roll material: SUS (Dia. 32) P=67.5mm
• Centering: automatic speed (high / low)
• Laminating / Lamination roll: 84 x 760, 0.9kw (about 19kg)
• Lam. speed: 1 ~ 4m/min, 6m/min max (optional)
• Speed display: digital display (m/min.)
• Temperature: up to 120 Celsius variable
• Temp. display: digital display (Celsius)
• Temp. control: PID type, on-off control
• Lam. pressure: 3.0 ~ 5.0kg/cm^2
• Laminating / Film keeper
• Vacuum type: suction by a vacuum blower (1.5kW), 250mm, 400mm, 640mm zones
• Film supply: mandrel Dia. 42 x 850mmL
• Film adjustment: +/-10mm (upper only)
• Film end alarm: 3 inch core, 6 inch core (fixed sensor)
• Exit conveyor: slide type
• Speed display: digital display (change-over to lam. roll speed)
• Roll material: SUS (Dia. 32) P=72mm
• Panel throughput
• 313 panels/hr (11.5sec. tact)
• Lamination speed: 3m/min.
• Tack time: 2sec.
• Resist placement: +/-1mm accuracy
• Electrical power: AC 200V, 3-phase, 25A, 50/60Hz
• Compressed air: tkg/cm^2, dry-air, 150NL/min.
• Length: 2,180mm
• Width: 1,390mm
• High: 1,850mm
• Weight: 1,000kg
• Pass-line: 950mm +/- 50mm
• Total area: 2.18m x 3.27m = 7.13m^2 (includes sliding area of both conveyors)
• Control panel: right or left
• Exhaust duct: Dia. 76mm body Dia. 39.5mm blower
• Exhaust volume: 11.3m^2/min.

Features:

• The fine pattern of Printed Wired Board (PWB) requires a clean lamination and environment. The rotary cutters minimize resist-chips during the film cutting process and improve the yield.
• User-friendly equipment with an easy operation. Mechanical link system, monitoring LCD.
• The main element of good lamination is a strong adhesion achieved by a stable pressure and heat. The induction heated jacket roll and heat-pipe system produces a strong thermal bonding.
• The rotary cutter system and the servomotor control increase the lamination speed (max. 6m/min. optional). High-Efficiency, High Quality and High-Productivity.

• Minimum Order: 1 set