Insert Molded Coils - Shielded
Product ID: 2430-01, 2430-02, 2430-Series

Specifications:

Features:

• Plastic molded.
• High reliability.
• Low cost.
• Test equipment: Q meter (HP 4342A)
• Measurement:
• Q and L measured with 1/2" long of TCW#16 soldered along the coil leads and with one end flush with the bottom of the coil then bent 1/4" down from stand off at an angle of 90 degree, except type 2901 with leads connected directly.
• L min. measured with core halfway out top of form, except type 2101, 2303, 2308 without core.
• Inductance greater then 0.1uh read at recommended Q meter frequency.
• Inductance below 0.1uh calculated from readings taken at 50MHz.




Others:

Part No.	L min	L nom	L max.	Min Q @ L nom	Color
2430-01	0.042	0.044	0.045	N/A	Brn
2430-02	0.064	0.070	0.074	N/A	Red
2430-03	0.115	0.117	0.120	N/A	Orn
2430-04	0.147	0.156	0.160	88 @ 40MHz	Yel
2430-05	0.182	0.197	0.205	86 @ 40MHz	Grn
2430-06	0.220	0.240	0.248	85 @ 40MHz	Blu
2430-07	0.259	0.280	0.290	80 @ 40MHz	Vio
2430-08	0.299	0.322	0.337	77 @ 40MHz	Gray
2430-09	0.338	0.363	0.377	80 @ 40MHz	Wht
2430-10	0.382	0.410	0.422	82 @ 40MHz	Blk

Ordering information:

• Minimum Order: Negotiable set