POCSAG Numerical Display Pager
Product ID: UT-68S, UT-98S, UT-69S, UT-99S
UT-6x and UT-98x is a compact numerical display pager. Frequency can be specified by customer. Recording format include POCSAG, ERMES and FLEX.
- Frequency range:
- UT-68S, UT-69S: 135~174MHz
- UT-98S, UT-99S: 278~283MHz
- Radio Frequency:
- UT-68S, UT-98S: single channel
- UT-69S, UT-99S: synthesized
- Paging sensitivity:
- 5Muv/m (512bps) tone only, front
- 7Muv/m (1200bps) tone only, front
- Channel spacing: 25KHz
- Selectivity: more than 60dB at +/-25KHZ
- Image rejection:
- UT-68S, UT-69S: more than 50dB
- UT-98S, UT-99S: more than 40dB
- Frequency stability: +/-10ppm
- Modulation type: frequency shift keying (FSK)
- Signal format: POCSAG code (CCIR RADIO paging code No.1)
- Bit rate: 512 or 1200bps
- Alert tone output: more than 75dB SPL at 30cm
- Identification code: 4 sets (4 function address per each ID code)
- Internal memory: 36 message, total 720 digits
- Power supply: one AAA 1.5 volt penlight battery
- Battery life: more than 850 hours (alkaline)
- Dimension: 67mm x 42mm x 15mm (without clip)
- Weight: approx. 58 grams (including battery)
- Working environment: -5 Celsius ~ 50 Celsius, 90%RH (at 40 Celsius)
- Very reliable design in receiving capability.
- Consumes 20% less power then other product.
- Month, day, hour and minute indicator.
- Big memory storage space can hold up to 36 sets of message, total 720 digits can be saved.
- Alarm, auto-on/off and light weight.
- Very compact.
- Highly stable reception due to double conversion super heterodyne front-end design.
- Duplicated message prompt and service area indicator available.
- Automatic power-saving and low voltage alarm design.
- Message time stamp available.
- Provide personal secretarial function, 2 sets of preset alarm are available to prevent miss of important engagement.
- Four sets of cap code for individual programming.
- Message protection: delete and erase (delete all) function are available.
Main Products:
pager