Hopper Dryer
Product ID: MM
To drying and preheating the plastic material before injection. To prevent the products have "silver mark", serve with 24 HRS timer for arrangement of pre-drying plan purpose.(mm-100, 200, 400 only)
- Even controlled temperature
- Quick heating the material
- Prevent metal contamination
- Promote speed for injection cycle
- Increase the injection speed
| Model | Capacity | Blower | Heater | Adaptable |
|---|---|---|---|---|
| MM-25 | 25kg | 90W | 2.7kW | Below 5(oz) |
| MM-50 | 50kg | 200W | 3.9kw | 5-8(oz) |
| MM-100 | 100kg | 250W | 6.0kW | 10-30(oz) |
| MM-200 | 200kg | 400W | 10.0kW | 30-60(oz) |
Main Products:
mould temperature controller, chiller, hopper dryer, autoloader, crusher, mold rack, mixer, mould clamp, level pad, magnetic separator, water regulator.