The VGA2410 development board has a modular design splitted into a four layer Core Board and a two layer Application Board. The SAMSUNG S3C2410A micro controller is located on the core board together with SDRAM, NAND Flash Audio and 10MBit Ethernet. It is very easy for the users to develop their own products by simply tailoring the Application Board. Due to the maturation and high reliability of CPU and thousands of times proved stability of the Core and Application board, this is the ideal choice for user input output controller or Terminal controller.
Specifications:
- CPU
- ARM S3C2410 microcontroller
- Memory
- SDRAM:64MB
- NAND Flash: 64MB, (K9F1208, can be replaced by other types of 16M, 32M, or 128M)
- Network interface:
- One 10M network interface, CS8900CQ3 chip, with Link and Receiving indicators
- USB interfaces:
- 2 x USB1.1 (Host & Device)
- Audio:
- The I2S interface chip UDA1341 supports
- one stereo audio output interface,
- one MIC interface
- Storage interface:
- One SD card interface
- One IDE interface, PATA/EIDE hard disks or CD
- Video output:
- One VGA interface, through which the VGA comp. display can be connected directly
- One TV interface, through which TVs following the PAL or NTSC specification can be connected directly
- One LCD Connector
- PS2 interface:
- One PS2 keyboard interface
- Misc. interfaces :
- One 40pin connector works as expansion port, draws out the IIC BUS, SPI BUS, the five AD outputs, the unused GPIO ports and the external interrupts lines.
- One 20pin connector draws out all the address lines and control lines needed to emulate a standard IDE/ATAPI/PATA port.
- For more information:
- please visit our homepage: http://www.developmentboard.net or contact leon@developmentboard.net
- Minimum Order: 1
- FOB: contact leon@developmentboard.net for details