ARM S3C2410 microcontroller based single board computer (SBC)
Specifications:
- CPU
- * Samsung S3C2410A, mainfrequency:203MHz
- memory
- * SDRAM: 64M byte
- * NOR Flash: 32 bit 32MB(intel nor flash, to which the operating system such as Wince can be installed)
- * NAND Flash: 64MB(K9F1208)(In case the nor flash is not available, the nand flash can support the self-drive, so that the cost can be saved, and the besetment that using 2M nor flash to install the boot can be taken out.
- Serial Port
- * Can be set by softwares to be two 5-wire serial ports or one 5-wire serial port and two 3-wire serial ports
- Network interface
- * 10M network port, CS8900Q3
- USB interface
- * One USB HOST(USB 1.1 protocol) interface
- * One USB Device(USB 1.1 protocol) interface(which can be set to be the second USB Host interface by adjusting the wires or modifying the driver.)
- VGA interface
- The mother board can be directly connected to the PC CRT display or LCD, operated with USB mouse
- CPLD programming interface
- * EPM3032 chip.
- Expansion GPRS/CDMA interface
- * including 3.3V PWL serial port, SPI interface, IO pins, power source,etc.
- * including 3.3V PWL serial port, SPI interface, IO pins, power source,etc.
- Bus expansion interface
- * through which some other device chips can be linked for research.
- To get more information
- visit http://www.developmentboard.net or contact leon@developmentboard.net
- Minimum Order: 1
- FOB: contact leon@developmentboard.net for details