Water-cooled Industrial Chiller
New-designed RCM series of industrial chillers are capable of controlling precisely the mold temperature in plastic molding process as so to shorten molding cycle and speed product formalization. The principle of heat exchange is adopted for cooling. They can achieve rapid cooling, stable temperature controlling, and will be little effected by the surounding factors. Therefore they are necessary good equipments in modern industry.
1) Cooling temperature range 5-35.
2) High-capacity tube-in-shell evaporator with very good heat exchange performance especially under high ambient temperature condition.
3) Tube-in-shell condensers with excellent heat transfer and rapid cooling.
4) Stainless steel warm-keeping water tank.
5) R22 refrigerant to be used for efficient cooling.
6) R407 environment-friendly refrigerant is optional to use.
7) Overload protection for compressor, pump.
8) Independent temperature controller, anti-freeze protection.
9) Phase sequence protection for control circuit, refrigeration loop controlled by high and low pressure switch.
10) Warm-keeping design for all piping to avoid partial convection.
11) Suitable for machine cooling in industries of plastics, electroplating, foodstuff, electronic products, bleaching and dyeing, ultrasonics.
| RCM-3W | RCM-4W | RCM-5W | RCM-8W | RCM-10W | RCM-12.5W | RCM-15W | RCM-20W | RCM-25W | RCM-30W | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cooling capacity(kw) | 7.5 | 10 | 13.5 | 20 | 25.5 | 31.5 | 38.5 | 50 | 62.5 | 77.5 | |
| Cooling capacity(Kcal/hr) | 6500 | 9000 | 11500 | 16500 | 22000 | 27000 | 33000 | 44000 | 54000 | 66500 | |
| Compressor's Horsepower(Kcal/hr) | 3 | 4 | 5 | 8 | 10 | 12.5 | 15 | 20 | 25 | 30 | |
| Refrigerant | R22 R407C | R22 R407C | R22 R407C | R22 R407C | R22 R407C | R22 R407C | R22 R407C | R22 R407C | R22 R407C | R22 R407C | |
| Evaporator | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | |
| Water-cooled Tube's Diameter | 1" | 1" | 1?quot; | 1?quot; | 2" | 2" | 2?quot; | 2?quot; | 3" | 3" | |
| Condensor | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | Tube-in-shell type | |
| Water tank capacity(L) | 50 | 50 | 50 | 100 | 100 | 150 | 150 | 180 | 200 | 280 | |
| Pumping Power(kw) | 0.75 | 0.75 | 0.75 | 1.1 | 1.1 | 2.2 | 2.2 | 2.2 | 2.2 | 2.2 | |
| Max pump flow rate (L/min) | 80 | 80 | 80 | 150 | 150 | 250 | 250 | 400 | 400 | 400 | |
| Max pumping press (kg/cm2) | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | 2.0 | |
| Tube outlet(lnch) | 1/2"*4(1"*1 Aircooled) | 1/2"*4 | 1/2"*4(1"*1 Aircooled) | 1?quot; | 1?quot; | 2" | 2" | 2" | 2" | 2?quot; | |
| Tube intlet | 1/2"*4(1"*1 Aircooled) | 1/2"*4 | 1/2"*4(1"*1 Aircooled) | 1?quot; | 1?quot; | 2" | 2" | 2" | 2" | 2?quot; | |
| Outfall | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | |
| Overflow Port | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | |
| W External size(mm)WxLxH | 600*1200*1000 | 580X 1100X 960 | 800X1280X1050 | 850X1450X1250 | 800*1200*1000 | 900*1500*1300 | 900*1500*1300 | 1000*2000*1400 | 1000*2000*1400 | 1000*2000*1400 | |
| Gross Weight(kg) | 120 | 140 | 170 | 220 | 280 | 350 | 400 | 450 | 550 | 600 |
Main Products:
Platics Granulator,Industrial Chiller,Hopper Dryer,Mixer,Auto-loader
