The split solar water heater is an active system, because it uses a pump with a controller to circulate the fluid between the heat pipe series solar collector and the storage tank, tank and solar collector are separate, while the collector is integrated in to the roof of the building, the tank and the pump station can installed anywhere of the building. The piping between the main components is made of brass and a special insulation with high temperature resistance for solar systems.
An Once Heat-exchange System is suit for climates where there is no risk of freezing. Recirculation freeze protection can be provided by the Recirculation feature in the controller. An Open Loop Water Heating System provides many advantages. It is the simplest and typically the least expensive active system to install. There is no heat exchanger, which allows efficient heat transfer directly to the water. The system operates at standard line pressure. It is simple to add capacity to the system if demand changes. The system integrates easily with existing systems.
Specifications:
- Solar collector (Heat Pipe Header)
- Outer shell：Aluminum Alloy;Thickness：1.8mm；Insulating laye：30mm;Polyurethane foam overall
- Solar collector(evacuated tube)
- Absorptance of selective coatings:α≥0.86；Emittance of selective coatings：ε≤0.08；solar irradiation under stagnation：H≤4.7 MJ/m2；stagnation parameter：Y≥190 m2℃/KW average heat-loss cefficient：ULT≤0.85W/ m2℃
- Solar collector (Stand)
- Aluminum Alloy，Thickness：4.0mm
- Water tank (crystal liner)
- crystal liner：Crystal liner adopts separating design to its pressure layer and leakage protection layer. and combines both .Its pressure layer adopts 1.8mm thick steel plate. and leakage protection layer 3.6mm special compound macromolecule material. weld it via steel crystal integration process. without welded joint.
- Solar (workstation)
- Circulating Water Pump:RS-15/6（WILO）
- Controller:Control of the system's operation
- Expansion tank: 5 8 12 18 L
- The main components
- 1) SIDITE Solar collector
- 2) Pump station including:
- Circulation pump,
- Check valve,
- SIDITE intelligent controller with sensors
- rass connector
- 3) Solar storage tank from 100L to 500L
- Advantages
- 1) No disorder water tank on your roof
- SIDITE split solar water heater is using a high efficiency solar collector on your roof and a high pressurized storage tank in the house. Integrated in to the roof of the building perfectly.
- 2)
- The perfect solar collector for domestic hot water heating system can be combined with existing energy source, such as your gas water heater, electric water heater, boiler, etc.
- 3)
- There have an auxiliary heating device--electric heater booster in the tank, so providing hot water in case of cloudy or rainy days, you will no need to worry about it.
- 4) No water inside the tube, the system can still in service even with several tubes breakage.
- 5) Completely automatic.
- 6) Cut out your energy bills
- Hot water heating (on average) accounts for 26% of your annual energy bill. With a SIDITE solar water heater you could generate enough solar energy to heat 70% of your hot water, FREE, year after year!
- Minimum Order: 25
- FOB: SHANGHAI