U-Lamp tTechnology Co., Ltd.

UF-Heater: Round Type (Honeycomb Ceramic Heating Element)

Specifications:

• Diameter: 90mm
• Height: 20mm
• Hole Dia: 4mm

Features:

• The temperature heat up quickly, reach 500¢J within 30 sec. The temperature could be controlled by Voltage.
• The temperature under 500¢J, no oxygen-consuming, and no oxidation.
• The heat effective over 90%, 1.5 times of P.T.C heating element and 2 times of traditional CR-NI heater.
• Emit far infrared ray and radiant heat, the emission rate is about 91%.
• Shapeable, could be round, square, tube type... etc.
• The same size could be in different wattage. No limitation of the size and wattage.
• Low coefficient of expansion, good anti-heat, will not exploded even splash water.
• The temperature can stay stable from room temperature till 500¢J. The temperature under 350¢J, could be using for 3000 hours continuously.
• The Voltage from 6V till 380V, both for AC and DC.
• No surge current, easy for design and assembling.
• Have two specialities at the same time. One is for the high temperature coefficient, like resistance (cable wire), and the other is like positive temperature coefficient (P.T.C. Heater) heating element.
• Have DIN VDE0700 approved.
• Passed UL 100,000 cycles reliability test and 1000 hours refrigerating test at 0¢J.

Main Product:
heater fan, honycomb ceramic heating element (UF-heater)

• Email this page
• Bookmark this page
• Print this page