UF-Heater: Sheet Type (No Hole)
Product ID: ST
- L: 390mm
- W: 245mm
- H: 7mm
- The temperature heat up quickly, reach 500℃ within 30 sec. The temperature could be controlled by Voltage.
- The temperature under 500℃, no oxygen-consuming, and no oxidation.
- The heat effective over 90%, 1.5 times of P.T.C heating element and 2 times of traditional CR-NI heater.
- Emit far infrared ray and radiant heat, the emission rate is about 91%.
- Shapeable, could be round, square, tube type... etc.
- The same size could be in different wattage. No limitation of the size and wattage.
- Low coefficient of expansion, good anti-heat, will not exploded even splash water.
- The temperature can stay stable from room temperature till 500℃. The temperature under 350℃, could be using for 3000 hours continuously.
- The Voltage from 6V till 380V, both for AC and DC.
- No surge current, easy for design and assembling.
- Have two specialities at the same time. One is for the high temperature coefficient, like resistance (cable wire), and the other is like positive temperature coefficient (P.T.C. Heater) heating element.
- Have DIN VDE0700 approved.
- Passed UL 100,000 cycles reliability test and 1000 hours refrigerating test at 0℃.
Main Products:
heater fan, honycomb ceramic heating element (UF-heater)
