Strip Terminal Assembly Machine
Cost-effective solution for terminal production – automatic assemble tubing onto continuous terminal. One machine assembles for different terminal sizes, and applies for single terminal, or terminal and ferrule. High assembly speed with programmed operation. Make assembly be productivity and quality, with minimum land space and labor. The leading terminal makers specify the UTA assembly machine for assembly production.
- Assembly machine size ( L x W x H ): 1,500 x 1,100 x 2,000 mm, N.W: 950 KG, without safety cover
- Motor: 1/2 HP, compressed air: 6 kg,
- Safety Certificate: CE
- OEM, ODM machine. Tool machine according to terminal strip and tubing specification, safety cover is optional, hopper is optional.
- Appearance will be various due to design requirement.
- Function - It assembles the insulated tube with the copper sleeve and terminal strip.
- Quality - It cuts the terminal strip neatly by the air cylinder.
- Quick - It can roll up or cut the finished products.
- Smart - It equips with the sensor on the feeding or assembling point. It stops automatically while a problem happens.
- CE
| Model | Wire mm2 | Wire AWG | Speed (PPM) | Remark |
|---|---|---|---|---|
| AN01 | 1.25 / 2.0 / 5 | 22 - 18 / 16 – 14 / 12-10 | 120 ~ 200 | 2-pcs or 3-pcs |
Main Products:
Wire Connectors, Battery Connector, Butt Splice, Bonded Washer, Sealed Washer, Terminal Assembly Machines, Blind Rivet Assembly Machine, Screw Assembly Machine, EPDM Washers, Roofing Washer, Heat Shrink Connector, Quick Splice, Butt Connector, Closed End Connector, Copper Terminals, Wiring Accessori
