Programmable Automatic Transfer Switch (ATS) Controller
User-Friendly Instrumentation & Protection
Specifications:
- 4 Digit 7 Segment LED Display
- Programmable display with 3 phase voltage & frequency
- Internal program settings & status display
- TDEN,TDNE & TDEC real time countdown display
- User-Friendly Status LED Display
- Display AUTO/TEST Status
- Over / Under Volts & Freq. ( Both Normal & Emergency)
- Display Real Time Power Loop
- All Phase Voltage & Frequency Monitoring
- Over Voltage adjustable range:110 ~ 550 VAC
- Under Voltage adjustable range:80 ~ 470 VAC
- Over Frequency adjustable range:51 ~ 70 Hz
- Under Frequency adjustable range:45 ~ 59 Hz
- Input Control Voltage: 160 ~ 250 VAC 50/60 Hz
- Voltage Measurement Range: 80 ~ 550 VAC 50/60 Hz
- Frequency Measurement Range:45 ~ 70 Hz
- Generator Start Relay: 7A @ 250 VAC Max
- Transfer to Normal Relay: 7A @ 250 VAC Max
- Operating Temperature: -20 ~ 70 °C
- Storage Temperature: -35 ~ 85 °C
- Operating Humidity: <95% Relative Humidity
Features:
- Micro-Processor Based Design
- Compact Size with User-Friendly LED Display
- Simple Push Button Programming & Operation
- There is no need for PC connection or software--all operation can be done directly on ATS-01 front panel.
- Provides 3 or 1 Phase Volt. / Freq. Monitoring & Protection For Both Normal & Emergency Sources
- Transfer Fail Alarm, Pre-exerciser or Pre-transfer Signal Output
- Remote Engine Start Signal
- Built-in Weekly Exerciser Timer
- No Generator Battery Connection Needed
- Program settings are auto-saved into memory and will remain saved even when power is disconnected.
Ordering information:
- Minimum Order: Negotiable
- FOB: TAIWAN
- TEL: 886-7-8121771
- FAX: 886-7-8121775
- E-mail: