Kutai Electronics Co., Ltd.

Automatic Battery Charger

Automatic Battery Charger
Wall Mountable 20Amp

Click here

Specifications:

• AC Power Input
• Voltage: 1 Phase 100 / 220 VAC ±10%
• Frequency: 50 / 60 Hz ±5%
• Charge Output Voltage
• Equalize: 14.5 VDC
• Float: 13.8 VDC
• Charge Voltage Range:
• Equalize: 12 VDC 13.5VDC ~ 16.0VDC Adjustment
• Float: 12 VDC 13.0VDC ~ 14.5VDC Adjustment
• Output Current Range: 0.5 ADC ~ 20.0 ADC
• Output Voltage Regulation: < ± 1%
• Equalize Charging Time: 6 / 12 / 24 Hours setting
• Charge Mode: Float Charge and Equalize Charge
• Cooling Forced: Fan Cooling
• Efficiency: > 80% @ Full Load
• Ripple: ±3%
• Protection
• Short circuit, over current,
• charge fail alarm, over voltage
• no current drain when input power is off
• Dimension: 400 (L) x 300 (W) x 295 (H) mm
• Weight: 24.6 Kg ± 2%
• Temperature
• Storage Temp: -20 ~ 40 °C
• Operation Temp: -10 ~ 40 °C
• Relative Humidity: < 90 %

Features:

• Low Ripple Voltage ( Below ± 3% )
• Float / Equalize Charge Mode
• Adjustable Equalize Charging Time
• Voltage Detector and Over Voltage Protection
• No Current Drain When Input Power Is Off
• Set Any Charge Current Up To 20 Amp with Over Current Protection
• Selectable 110 / 220 VAC Input

Main Products:
Engine control unit, Transfer Switch, Generator Voltage Regulator, Automatic Transfer Switch, Automatic Voltage Regulator, Automatic Battery Charger, Electronic Governor Controller, ATS Controller and Genset Controller

• Email this page
• Bookmark this page
• Print this page