Provides Full Instrumentation & Protection On Any Generator Set
Specifications:
- 4 Digit 7 Segment Easy-to-Read LED Display
- Programmable Display with 3 Phase Volts, Amp & Freq.
- Failure Alarms Status
- Battery DC Voltage Indicator
- Total Engine Operating Hours & Service Alarm
- Internal Program Settings & Status
- Protection & Alarm Status
- Engine Start Failure
- Engine Over Speed
- MPU Failure
- Abnormal Generator Voltage
- Low Engine Oil Pressure
- Emergency Stop Activated
- High Engine Temperature
- Generator Over Load
- Low Fuel Level
- Low DC Voltage
- Power Input: Voltage 9 ~ 30 VDC
- Sensing Input
- Voltage: 15 ~ 380 VAC 3 phase 3 wire
- Frequency: 50 ~ 60 Hz
- MPU Signal Input
- Voltage: ±2V to ±70V Peak
- Frequency: Min.100Hz, Max.10KHz
- Control Signals: Current 2.5 Amp with input volts
- CT Specifications
- Burden: 2.5VA
- CT Range: Min. 25A/5A, Max. 3000A/5A
- Power Dissipating: Max. 7 Watt
- Operating Temp.: -25 ~ +75 °C
- Auxiliaries
- Easy-to-Install Relay Board: ECU-11(12V) & ECU-22(24V)
- Isolation Transformer Module: PTU-03
Features:
- Micro-Processor Based Design
- Easy-to-Read Large LED Display
- Compact Size with Vibration Protected
- Provides Full Engine & Generator Alarms Signals & Shut Downs
- 2 Wire Remote Start & Stop
- Front Panel Mounted With Manual, Off & Auto Switch
- Provided With Easy-to-Install Auxiliaries, Relays & Fuses
- No Need for Magnetic Pick-up to Check Over Speed
- Simple Operation & Programming
- There is no need for PC connection or software--all operation can be done directly on ECU-02.
- No Battery Power Needed to Maintain Program
- Customized settings are auto-saved into memory and will remain even when power is off.
Ordering information:
- Minimum Order: Negotiable
- FOB: TAIWAN
- TEL: 886-7-8121771
- FAX: 886-7-8121775
- E-mail: