Product ID: G-08

Universal Pre-Assembled Auto-Start Genset Control Panel

Provide Protection & Full Instrumentation For All Types of Generator Set Up To 3000 Amp Output
G-08 is built with ECU-11 to fit DC 12V input
G-08 includes ECU-02, ECU-11, Harness, 3 gauges (Water Temp, Oil Temp., Charge Current), Start Relay & Stop Relay.

Click here

Click here for details.

• 4 Digit 7 Segment Easy-to-Read LED Display
• Easy-to-Read Large LED Display
• Programmable Display with 3 Phase Volts, Amp & Freq.
• Failure Alarms Status
• Battery DC Voltage Indicator
• Total Engine Operating Hours & Service Alarm
• Internal Program Settings & Status
• Protection & Alarm Status
• Engine Start Failure
• Engine Over Speed
• MPU Failure
• Abnormal Generator Voltage
• Low Engine Oil Pressure
• Emergency Stop Activated
• High Engine Temperature
• Generator Over Load
• Low Fuel Level
• Low DC Voltage
• Power Input: Voltage 9 ~ 30 VDC
• Sensing Input
• Voltage: 15 ~ 380 VAC 3 phase 3 wire
• Frequency: 50 ~ 60 Hz
• MPU Signal Input
• Voltage: ±2V to ±70V Peak
• Frequency: Min.100Hz, Max.10KHz
• Control Signals: Current 2.5 Amp with input volts
• CT Specifications
• Burden: 2.5VA
• CT Range: Min. 25A/5A, Max 3000A/5A
• Power Consumption: Under 7 Watt
• Operating Temp.: -25 ~ +75 °C

Features:

• Micro-Processor Based Design
• Convenient Alarm Table In Any Language
• Provides Failure Alarm Status & Signals
• Remote & Manual Starting / Stopping
• Powder Coated Finish Steel Enclosure
• Simple Operation & Programming
• There is no need for PC connection or software--all operation can be done directly on G-08
• Withstand Severe Vibration
• Built-In Additional 70 Amp Relay
• Superior Serviceability & Easy Maintenance
• Customized settings are auto-saved into memory and will remain even when power is off

• Minimum Order: Negotiable
• FOB: TAIWAN
• TEL: 886-7-8121771
• FAX: 886-7-8121775
• E-mail: kutai2008@kutai.com.tw