Provide Protection & Full Instrumentation For All Types of Generator Set Up To 3000 Amp Output G-08 is built with ECU-11 to fit DC 12V input G-08 includes ECU-02, ECU-11, Harness, 3 gauges (Water Temp, Oil Temp., Charge Current), Start Relay & Stop Relay.
Specifications:
- 4 Digit 7 Segment Easy-to-Read LED Display
- Easy-to-Read Large LED Display
- Programmable Display with 3 Phase Volts, Amp & Freq.
- Failure Alarms Status
- Battery DC Voltage Indicator
- Total Engine Operating Hours & Service Alarm
- Internal Program Settings & Status
- Protection & Alarm Status
- Engine Start Failure
- Engine Over Speed
- MPU Failure
- Abnormal Generator Voltage
- Low Engine Oil Pressure
- Emergency Stop Activated
- High Engine Temperature
- Generator Over Load
- Low Fuel Level
- Low DC Voltage
- Power Input: Voltage 9 ~ 30 VDC
- Sensing Input
- Voltage: 15 ~ 380 VAC 3 phase 3 wire
- Frequency: 50 ~ 60 Hz
- MPU Signal Input
- Voltage: ±2V to ±70V Peak
- Frequency: Min.100Hz, Max.10KHz
- Control Signals: Current 2.5 Amp with input volts
- CT Specifications
- Burden: 2.5VA
- CT Range: Min. 25A/5A, Max 3000A/5A
- Power Consumption: Under 7 Watt
- Operating Temp.: -25 ~ +75 °C
Features:
- Micro-Processor Based Design
- Convenient Alarm Table In Any Language
- Provides Failure Alarm Status & Signals
- Remote & Manual Starting / Stopping
- Powder Coated Finish Steel Enclosure
- Simple Operation & Programming
- There is no need for PC connection or software--all operation can be done directly on G-08
- Withstand Severe Vibration
- Built-In Additional 70 Amp Relay
- Superior Serviceability & Easy Maintenance
- Customized settings are auto-saved into memory and will remain even when power is off
- Minimum Order: Negotiable set
- TEL: 886-7-8121771
- FAX: 886-7-8121775
- E-mail: kutai2008@kutai.com.tw