The Taily HDSL is a high bit-rate Digital Subscriber Line (HDSL) transmission system designed to meet your digital communication needs. The Tailyn HDSL is installed at both ends in a matter of hours, providing E1 and data port digital connectivity on two or three pairs of unconditoned copper over a distance of up to 3.5 Km. This is done at lower cost than repeatered copper links or fiber transmission. Furthermore, transmission quality in orders of magnitude better than repeatered copper and comparable to that of fiber (10e-10BER). A unique digital processor performs the standard 2 B1Q line code, high speed adaptive filtering, and echo cancellation. It enables the Taiyn HDSL to provide superior performance, compactness, high reliability and maximum range. DSU functionality is build in, and a variety of interfaces make it ideal for multiple applications. These include video conferencing, LAN-to LAN connection, channel extensions, distance learning, distributed PBX networking, and remote data center access. Providing high speed digital connections using the Tailyn HDSL, is as easy as it was to install an ordinary telephone line in the past.
Specifications:
- Hard-Ware system component:
- Chassis dimensions: 30.48(H) x 48.26(W) x 30.48(D) cm
- C.O configuration 16 HLXE-C plug in modules with MPU and APU
- Remote Dimensions: 15.24(H) x 6.35(W) x 30.48(D) cm
- RT configuration: 1 HLXE-R/C
- Soft-ware system component: System configuration; system administration; display status; alarms; HLXE configuration; Performance monitoring; system maintenance
- System characteristic:
- APU display operating information for 16 HLXE-C
- MPU offer interface for 8 sets of HDSL shelf
- MPU offer OSS interface
- OAM&P set-up by DIP switch or MPU operating interface
- Display and Control 16 HLXE-C/R
- Update software through MPU interface (Local or remote)
- Save system parameter and data base on PC
- The span and local powering
- The integration of the E1 interface
- The Multi-shelf communication
- The network management for local and remote management
- Standalone or multimount designs for power and space savings
- Power
- Approx. 350W for full system
- HLXE-C/R power dissipation 7W
- Clock: clock source Intenal, E1 Derived
- Customer/Network interface
- E1 interface: CCITT G.703
- Data port interface: N X 64K (V.35, EIA-530, 64K G.703)
- Operations interface:
- Craft port Async speed: 300~19.2Kbps
- X.25 pad port EIA-232/423D(DB25)
- Modem port EIA-232/423D(DB25)
- Shelf-to-Shelf port EIA-485
- Loop interface:
- ETSI RTR/TM-03036
- ETR 152
- Maintenance:
- Diagnostics parametic performance measure
- E1 Near-End Loop-Back
- E1 Far-End Loop-Back
- Customer Loop-Back
- Monitor MON, IN, OUT jack assess for the E1 on the HLEX-R
- Sealing current Test on the HLXE-C
- Environment:
- Temperature: -20~+65 Deg C
- Relative Humidity: 10%~90%
- Minimum Order: Negotiable set