Pin Hitter Type
Product ID:
Every motor revolution causing two hammer pin impact at the some time to keep balance impact, low vibration and large output power.
Anvil is whole-shaped without any connections and is manufactured of alloy steel of nickel, chromium, and molybdenum.
Application:
Apply to Heavy-productive assembly line of motor-vehicle bicycle, and motor.
- OP-308A(3/8")/308B(1/2"):
- OP-308LA(3/8")/308LB(1/2"):
- OP-408LA(3/8")/408LB(1/2"): Rear exhaustion low noise
- OP-909B(1/2"): Mini type Rear exhaustion low noise
- OP-911B(1/2"): Rear exhaustion low noise
| Item Number | Bolt Size Capacity (mm) | 5S Increase Torque n-m (ft-lb) | Free Speed (R.P.M) | Air Pressure (kg/cm2) | Air Consumption (C.F.M) | Overall Length (mm) | Air Inlet (N.P.T) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| OP-308A/308B | 17 | 290 (214) | 7500 | 6.3 (90 P.S.I) | 7.5 | 230 | 1/4" | 1.30 |
| OP-308LA/308LB | 17 | 290 (214) | 7000 | 6.3 (90 P.S.I) | 7 | 190 | 1/4" | 1.40 |
| OP-408LA/408LB | 17 | 300 (221) | 8000 | 6.3 (90 P.S.I) | 7 | 165 | 1/4" | 1.40 |
| OP-909B | 28 | 450 (332) | 7000 | 6.3 (90 P.S.I) | 10.5 | 210 | 1/4" | 2.2 |
| OP-911B | 30 | 500 (369) | 6000 | 6.3 (90 P.S.I) | 8 | 210 | 1/4" | 2.65 |
Main Products:
Pneumatic Tool, Air Tool, Air Screw Driver, Air Drill, Air Wrench, Air Sander, Air tool kit
Contact Details
Minimum Order:Negotiable
Address:No. 22, Kou Hsin Rd., Shenkang Taichung Hsien, 42952 Taiwan
Tel:886-4-25621763
Fax:886-4-25627704
E-mail:
onpin@onpin.com.tw