Limburg International Co., Ltd.

Company | Showroom | Contact Us

Index Table for Boring and Milling Machines
Product ID: LBI LGT

Index Table for Boring and Milling Machines

Specifications:

Drive:

Vertical: air pressure 5-8 kgs/cm²
Swivel: manual

Index numbers: indexes of 2, 3, 4, 6, 8, 9, 12, 18, 24, 36, 72, and 5° indexes special index available
Swivel direction: right & left swivel
Index accuracy (sec): 4 indexes ±2 sec, 72 indexes ±3 sec

Features:

Well suited for use on a boring, milling or drilling machine...etc.
Clutch gear positioning.
Air clamping system.

Others:

Model	LGT-450	LGT-600	LGT-700	LGT-800	LGT-1000	LGT-1200
L x W	450 x 450 (18" x 18")	600 x 600 (24" x 24")	700 x 700 (28" x 28")	800 x 800 (31" x 31")	1,000 x 1,000 (40" x 40")	1,200 x 1,200 (47" x 47")
Overall height	150 (6")	200 (7-7/8")	220 (8-3/5")	280 (11")	300 (11-7/8")	340 (13-3/8")
Spindle bore	30 (1-1/4")	40 (1-1/2")	40 (1-1/2")	60 (2-3/8")	60 (2-3/8")	80 (3-1/8")
T-slot	18 (11/16")	20 (3/4")	20 (3/4")	22 (7/8")	22 (7/8")	22 (7/8")
Vertical theoretical load (kg)	2,400 (5,921 lb)	3,400 (7,496 lb)	3,400 (7,496 lb)	4,500 (9,920 lb)	6,000 (13,228 lb)	7,000 (15,432 lb)
Permissible load (kg)	1,000 (2,205 lb)	2,000 (4,409 lb)	2,000 (4,409 lb)	3,000 (6,614 lb)	5,000 (11,023 lb)	6,000 (13,280 lb)
Weight (kg)	200 (441 lb)	400 (882 lb)	600 (1,323 lb)	900 (1,984 lb)	1,200 (2,646 lb)	2,000 (4,409 lb)
Accuracy chart	-	-	-	-	-	-
Model	LGT-450 mm/inch	LGT-600 mm/inch	LGT-700 mm/inch	LGT-800 mm/inch	LGT-1000 mm/inch	LGT-1200 mm/inch
Table surface straightness	0.015/0.0006	0.02/0.0008	0.02/0.0008	0.02/0.0008	0.03/0.0012	0.03/0.0012
Table surface run out	0.01/0.0004	0.015/0.0006	0.015/0.0006	0.015/0.0006	0.02/0.0008	0.03/0.0012
Parallelism between top and bottom surface	0.015/0.0006	0.02/0.0008	0.02/0.0008	0.02/0.0008	0.03/0.0012	0.03/0.0012
T-slot squareness	0.015/0.0006	0.02/0.0008	0.02/0.0008	0.02/0.0008	0.03/0.0012	0.03/0.0012
Concentricity of center point	0.01/0.0004	0.01/0.0004	0.01/0.0004	0.01/0.0004	0.01/0.0004	0.03/0.0012
Squareness of side reference plane	0.015/0.0006	0.02/0.0008	0.02/0.0008	0.02/0.0008	0.03/0.0012	0.03/0.0012
T-slot accuracy (sec)	0.015/0.0006	0.02/0.0008	0.02/0.0008	0.02/0.0008	0.02/0.0008	0.03/0.0012
Index accuracy (sec): 4 indexes	±2	±2	±2	±2	±2	±2
Index accuracy (sec): 72 indexes	±3	±3	±3	±3	±3	±3

Ordering information:

Minimum Order: Negotiable

This page was printed from http://www.allproducts.com/manufacture4/lbi/06-lgt_print.html

Copyright © 1996-2009 All Products Online Corporation (TW). Reproduction in whole or in part in any form or image of Index Table for Boring and Milling Machines without the permission of All Products Online Corporation and Limburg International Co., Ltd. is prohibited.