48-96 Cav. PET Preform Lines 2 Screw,The Cooling Robot,9S
48-96 Cav. PET Preform Lines 2 Screw,The Cooling Robot,9S
Product ID: 48-96 Cav. PET Prefo
Send Inquiry
2 Screw,The Take-out Robot with 3 Station Cooling ,Only 9S.
Demark 48,72,96 cavities pet preform system@(injection molding system@injection molding machine@pet preform line@) uses a new part cooling and handling system, which features:
1. Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
2. Optimized cycle utilization — being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.
Demark pet preform injection molding systems are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 96 cavities.
Demark pet injection systems offer:
1. Faster cycles(9s)
2. Reduced energy consumption
3. Smaller footprint
4. Improved repeatability
5. Rapid set-up
Features:
1. Two state plasticizing enables plenty injection quantity;
2. Take out plate with three working position insures sufficien
Demark 48,72,96 cavities pet preform system@(injection molding system@injection molding machine@pet preform line@) uses a new part cooling and handling system, which features:
1. Cooling on the inner surface of the preform without using compressed air, unlike most post-mold cooling systems which only cool the outer surface
2. Optimized cycle utilization — being mounted on the moving platen, the cooling system remains active for up to 85% of the overall cycle.
Demark pet preform injection molding systems are available from 280 to 500 tonnes (2800 to 5000 kN) and up to 96 cavities.
Demark pet injection systems offer:
1. Faster cycles(9s)
2. Reduced energy consumption
3. Smaller footprint
4. Improved repeatability
5. Rapid set-up
Features:
1. Two state plasticizing enables plenty injection quantity;
2. Take out plate with three working position insures sufficien
Certificate
- ISO9001 & CE
Main Products
Plastic injection machine,Blow moulding machine,Mold,PET mold