Fast Field installation connector is a new kind of connector that could be used in FTTH project scene. They don’t need to polishing, no epoxy. They could be installed in the field and make connection less than two minutes. Of course. It don’t need fused the fiber. Just some little tools enough, so it could save time and cost.
OMC could offer embedded type fast connector. This connector has a bare fiber insert in the ferrule. The front end face was polished in advance. The fiber mating point is in a precision V groove.
Feature:
● Polishing way is UPC or APC
● Connector type is SC and could match with normal SC adapter
● Related cable is Bow-type drop cable 2.0*3.1 or normal 3.0mm.
● Good performance and high success rate
● Easiness in installation
● Special tool is simple and convenient to use
Insertion Loss 40dB
OMC could offer embedded type fast connector. This connector has a bare fiber insert in the ferrule. The front end face was polished in advance. The fiber mating point is in a precision V groove.
Feature:
● Polishing way is UPC or APC
● Connector type is SC and could match with normal SC adapter
● Related cable is Bow-type drop cable 2.0*3.1 or normal 3.0mm.
● Good performance and high success rate
● Easiness in installation
● Special tool is simple and convenient to use
Insertion Loss 40dB
Main Products
Fiber cable,Adapter,connector,Fiber patch cord,pigtail,cable assemblie