CableTest CBT Series Model 300A Integral Type Model 300A Integral Type Introduction The CBT series is a self-contained, portable, rugged, reliable and compact cable tester, ideal for field use for underground buried or pipeline cable testing and fault locating. It is consist of flash testing, path tracing, and fault locating sections. Flash test section is used to approximately detect the position of fault point from one end of the cable, and also used for measuring cable length and electric wave propagation velocity in cable. Path signal generator is integrated and is able to generate 15 kHz sine wave signal, which is used for buried cable path tracing and depth measuring. Fault locator is a standard accessory and is used for accurately locating position of fault point within the range of flash test detected coarse length range.
Specifications:
- Integrated Path Signal Generator
- - Generate 15 kHz sine wave signal
- Standard Accessory: Point Locator
- - Sensibility: Signal generator of 50 ohm sending 300 Hz signal, point locator maintains non-distorted output of 2 V, input signal not above 10 micro-volts at signal to noise ratio better than 20:1
- Model 400A Separate Type
- It has all the same functions and specifications
- High Voltage Auxiliary Stand
- Code 200-3 is an integral station of high voltage generation and control in assistance to cable failure testing and locating.
Ordering information:
- Minimum Order: 1 set