It has a backing made of bronze with particular formulation supported by certain angle and density. The solid lubricants inlaid in the bushing are compounded with precision. It's used in successive casting machine, mineral mountain machinery, shipping, steam turbine etc.
Specifications:
- all size
- we can produce all size according to your designJDB-3
- JDB-3 has almost the same constructure as JDB-2.Suitable for low load position, wear performance worsens when under middle or high load. The mating layer is same as JDB-2 so that more cost-saving than JDB-2 whereas compression strength increases and weldale. Most suitable for dry position in construction, metallurgical machines, conveyor machines etc.JDB-4
- JDB-4 is based on cast iron Ht250 and embedded with solid lubricant. With very good performance under low load situation. It isn¡¯t suitable for middle and high load. A typical cost saving material, this product can substitute JDB-2 to be applied in the position without high requirements such as die guider, plastic injection machines etcJDB-P
- It has a backing made of bronze with particular formulation supported by certain angle and density. The solid lubricants inlaid in the bushing are compounded with precision. It's used in successive casting machine, mineral mountain machinery, shipping, steam turbine etc.JDB-1U
- JDB-1U takes oil in inner grooves to work. It can be used in low speed because of larger load, longer life and higher HB than Al-Cu bearing. Now JDB-1U is mostly used in gear cases and joint parts of grabs.
- maintenance free
- Freedom from maintenance through self-lubrication,
- Maximum economic static and dynamic load carrying capacity,
- Consistently low coefficient of friction,
- No 'stick-slip',
- It reduces vibrations and allows for quiet running,
- Long-life and maximum economic as a result of its high resistance to wear.
Features:
Ordering information:
- Minimum Order: Negotiable