Beijing HaiLin Electric Equipment Co,.Lt

HL-G2 Series 2-way Motorized Valves

The valve must be piped so that the paddle closes against the direction of flow.
When installing, the actuator to the valve, the actuator must be placed in the manually open position by using the manual operating lever (N.C. only).
The first time the valve is operated electrically, the manual operating lever of the actuator will transfer to the automatic position. The manual operating lever can be used to allow for flushing of the system after installation.
The valves are designed for application to closed hydronic heating and cooling systems. Use in systems that have substantial make-up water (open systems) is not recommended. High levels of dissolved oxygen and chiorine found in open systems may attack the valve materials and result in premature failure. Due to condensation in chilled water applications, install valve over a drip pan.

Specifications:
Target fluid: water ^$^# Rated power supply: 220V, 50/60Hz ^$^#Operating temperature range: 5-90℃ ^$Operating time: valve open action: less than 10s; valve close action: less than 6s^#
Features:

Forging Brass Body^$PART NUMBER

Model Caliber Type Kv (Cv) value △P (Mpa)

HL-G2-1-S2 1" 2 way, separated body 6.9(8.0) 0.15

HL-G2-3/4-S2 3/4" 2 way, separated body 3.0(3.5) 0.18

HL-G2-1/2-S2 1/2" 2 way, separated body 2.2(2.5) 0.20

HL-G3-1-S2 1" 3 way, separated body 6.9(8.0) 0.15

HL-G3-3/4-S2 3/4" 3 way, separated body 3.0(3.5) 0.18

HL-G3-1/2-S2 1/2" 3 way, separated body 2.2(2.5) 0.20

^#Stainless Base with Aluminum Shell^$^#Synchromoter Drive^$^#

Main Products:
Thermostat,Motorized valve for fan coil unit,Electric modulating valve

• Email this page
• Bookmark this page
• Print this page
• Share: