Features of the Aluminum Motors:
-Removable feet
-IP55
-Low noise
-Little vibration
-Light weight
-Star connection for motors up to 3kW
-Delta connection for motors from 4kW and above
-Three phase squirrel cage induction motors
-Suitable for driving different kinds of machines
-The ambient temperature is not exceeding 40℃
-The altitude is not over 1000 meters above sea level
-The mounting dimensions are fully conformed to the IEC standard
-Three phase, 230/400V, up to 3kw; 50/60Hz
-Three phase, 400/690V, 4kw and above; 50/60 Hz
-Class "F" insulation.
-Class "H" insulation can be made on request
-V-ring on both end shields or oil seal ring on both end shields
-Terminal box located on the top
-Squirrel cage rotor/Aluminum die cast
-Motor shafts on the drive end side with a tapped hole
-Ball bearing on both drive end and non-drive end side
-Roller bearing for frame 160M
-Surface cooling
-Thermal contact or Thermistor protected on request
-Suitable for inverter duty application
-S1 working duty
SPECIAL FEATURES AND DESIGNS
-Horizontal or vertical flange mounting
-Double ended shaft extension
-Special shaft
-Drain holes
-Non-standard voltage and frequency
-Fixed bearing on drive end side
-Removable feet
-IP55
-Low noise
-Little vibration
-Light weight
-Star connection for motors up to 3kW
-Delta connection for motors from 4kW and above
-Three phase squirrel cage induction motors
-Suitable for driving different kinds of machines
-The ambient temperature is not exceeding 40℃
-The altitude is not over 1000 meters above sea level
-The mounting dimensions are fully conformed to the IEC standard
-Three phase, 230/400V, up to 3kw; 50/60Hz
-Three phase, 400/690V, 4kw and above; 50/60 Hz
-Class "F" insulation.
-Class "H" insulation can be made on request
-V-ring on both end shields or oil seal ring on both end shields
-Terminal box located on the top
-Squirrel cage rotor/Aluminum die cast
-Motor shafts on the drive end side with a tapped hole
-Ball bearing on both drive end and non-drive end side
-Roller bearing for frame 160M
-Surface cooling
-Thermal contact or Thermistor protected on request
-Suitable for inverter duty application
-S1 working duty
SPECIAL FEATURES AND DESIGNS
-Horizontal or vertical flange mounting
-Double ended shaft extension
-Special shaft
-Drain holes
-Non-standard voltage and frequency
-Fixed bearing on drive end side
Features
IEC standard and feet removable^$^#Certificate
- CE and CCC approved
Main Products
Electric Motors