plywood
Product ID: film faced -plywood
Product Name: Film Faced Plywood
Part one
specification
1) Core: Poplar, combi, etc.
2) Film: Imported brown film, domestic dark film
3) Film Density: 120g/m2
5) Size: 1220*2440mm，thickness 12~25mm
1250*2500mm, thickness 16~25mm
4)Glue: MR (moisture resistance) domestic
WBP (weather and boil- proof glue) export from dynea corp. of Netherlands
Formaldehyde emission class E1 (≤ 1.5mg/L)
6) Tolerance: +-0.5mm
7) moisture: less than 12%
Part two
Advantage and character
1) Anti-abrasive, winkles-resistant and anti-erosive
2) If put in boiled water for 24 hours, WBP is still glue- sticking and non-deformed
3) If used abide by the illustrations strictly, it can be reused more than 30 times, thus reducing the cost greatly and avoiding the disadvantages
rustily and erosive of iron mould
4) Solves the problems of leaking and rough surface during constructing process
5) Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat
6) Can decorate or brush directly without any renovation
7) Realizing a higher economic profits
8) Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing.
9) Low levels of formaldehyde, phenol, and other toxic emissions
Features:
black film faced plwood ^$Product Name: Film Faced Plywood
Part one
specification
1) Core: Poplar, combi, etc.
2) Film: Imported brown film, domestic dark film
3) Film Density: 120g/m2
5) Size: 1220*2440mm，thickness 12~25mm
1250*2500mm, thickness 16~25mm
4)Glue: MR (moisture resistance) domestic
WBP (weather and boil- proof glue) export from dynea corp. of Netherlands
Formaldehyde emission class E1 (≤ 1.5mg/L)
6) Tolerance: +-0.5mm
7) moisture: less than 12%
Part two
Advantage and character
1) Anti-abrasive, winkles-resistant and anti-erosive
2) If put in boiled water for 24 hours, WBP is still glue- sticking and non-deformed
3) If used abide by the illustrations strictly, it can be reused more than 30 times, thus reducing the cost greatly and avoiding the disadvantages
rustily and erosive of iron mould
4) Solves the problems of leaking and rough surface during constructing process
5) Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat
6) Can decorate or brush directly without any renovation
7) Realizing a higher economic profits
8) Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing.
9) Low levels of formaldehyde, phenol, and other toxic emissions
^#twin plywood ^$Product Name: Film Faced Plywood
Part one
specification
1) Core: Poplar, combi, etc.
2) Film: Imported brown film, domestic dark film
3) Film Density: 120g/m2
5) Size: 1220*2440mm，thickness 12~25mm
1250*2500mm, thickness 16~25mm
4)Glue: MR (moisture resistance) domestic
WBP (weather and boil- proof glue) export from dynea corp. of Netherlands
Formaldehyde emission class E1 (≤ 1.5mg/L)
6) Tolerance: +-0.5mm
7) moisture: less than 12%
Part two
Advantage and character
1) Anti-abrasive, winkles-resistant and anti-erosive
2) If put in boiled water for 24 hours, WBP is still glue- sticking and non-deformed
3) If used abide by the illustrations strictly, it can be reused more than 30 times, thus reducing the cost greatly and avoiding the disadvantages
rustily and erosive of iron mould
4) Solves the problems of leaking and rough surface during constructing process
5) Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat
6) Can decorate or brush directly without any renovation
7) Realizing a higher economic profits
8) Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing.
9) Low levels of formaldehyde, phenol, and other toxic emissions
^#film faced plywood ^$Product Name: Film Faced Plywood
Part one
specification
1) Core: Poplar, combi, etc.
2) Film: Imported brown film, domestic dark film
3) Film Density: 120g/m2
5) Size: 1220*2440mm，thickness 12~25mm
1250*2500mm, thickness 16~25mm
4)Glue: MR (moisture resistance) domestic
WBP (weather and boil- proof glue) export from dynea corp. of Netherlands
Formaldehyde emission class E1 (≤ 1.5mg/L)
6) Tolerance: +-0.5mm
7) moisture: less than 12%
Part two
Advantage and character
1) Anti-abrasive, winkles-resistant and anti-erosive
2) If put in boiled water for 24 hours, WBP is still glue- sticking and non-deformed
3) If used abide by the illustrations strictly, it can be reused more than 30 times, thus reducing the cost greatly and avoiding the disadvantages
rustily and erosive of iron mould
4) Solves the problems of leaking and rough surface during constructing process
5) Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat
6) Can decorate or brush directly without any renovation
7) Realizing a higher economic profits
8) Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing.
9) Low levels of formaldehyde, phenol, and other toxic emissions
^#black fim faced plywood ^$Product Name: Film Faced Plywood
Part one
specification
1) Core: Poplar, combi, etc.
2) Film: Imported brown film, domestic dark film
3) Film Density: 120g/m2
5) Size: 1220*2440mm，thickness 12~25mm
1250*2500mm, thickness 16~25mm
4)Glue: MR (moisture resistance) domestic
WBP (weather and boil- proof glue) export from dynea corp. of Netherlands
Formaldehyde emission class E1 (≤ 1.5mg/L)
6) Tolerance: +-0.5mm
7) moisture: less than 12%
Part two
Advantage and character
1) Anti-abrasive, winkles-resistant and anti-erosive
2) If put in boiled water for 24 hours, WBP is still glue- sticking and non-deformed
3) If used abide by the illustrations strictly, it can be reused more than 30 times, thus reducing the cost greatly and avoiding the disadvantages
rustily and erosive of iron mould
4) Solves the problems of leaking and rough surface during constructing process
5) Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat
6) Can decorate or brush directly without any renovation
7) Realizing a higher economic profits
8) Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing.
9) Low levels of formaldehyde, phenol, and other toxic emissions
^#brown film faced plywood ^$Product Name: Film Faced Plywood
Part one
specification
1) Core: Poplar, combi, etc.
2) Film: Imported brown film, domestic dark film
3) Film Density: 120g/m2
5) Size: 1220*2440mm，thickness 12~25mm
1250*2500mm, thickness 16~25mm
4)Glue: MR (moisture resistance) domestic
WBP (weather and boil- proof glue) export from dynea corp. of Netherlands
Formaldehyde emission class E1 (≤ 1.5mg/L)
6) Tolerance: +-0.5mm
7) moisture: less than 12%
Part two
Advantage and character
1) Anti-abrasive, winkles-resistant and anti-erosive
2) If put in boiled water for 24 hours, WBP is still glue- sticking and non-deformed
3) If used abide by the illustrations strictly, it can be reused more than 30 times, thus reducing the cost greatly and avoiding the disadvantages
rustily and erosive of iron mould
4) Solves the problems of leaking and rough surface during constructing process
5) Particularly suitable for watering concrete project because it can make the concrete surface smooth and flat
6) Can decorate or brush directly without any renovation
7) Realizing a higher economic profits
8) Physical mood is better than iron moulds and can satisfy the requirements of constructing mould, while the iron ones are easy to be deformed and can hardly recover its smoothness even after repairing.
9) Low levels of formaldehyde, phenol, and other toxic emissions
^#
Main Products:
film faced plywood T&G and veneered plywood
plywood