YITONG INDUSTRY (NINGBO) CO., LTD.
|
Product ID: FR/LR
Track rollers--for Vee bars or Plain rollers
The backlash setting and the pre-tensioning of the rollers takes place via the eccentric hub of the rollers of the series FR.., FR..R or LR.., LR..R.
The FR..Z and LR..Z series are the concentric models. In the eccentric rollers, the inner bolts are provided with two holes. These allow for the adjustment of the backlash. If a roller is located in its zero position, the teeth backlash will be the standard value of 0.05 mm flank clearance.
The service life of the system will be reduced by excessive tensioning. With too little tension the rollers will not run, or will wear due to the poor meshing.
More information:http://www.yi-tong.com/en/plain_roller.htm
|
Track rollers
|
|
|
Main Product:
Cam Roller, Cam Rollers, Linear Slide, Guide Wheels, Linear Motion Bearings, Linear Rail, Track Roller, Track Rollers, Track Roller Bearing
|
Ordering information:
- Minimum Order: Negotiable
- FOB: Ningbo or shanghai
- TEL: 86-574-86303188 / 86305533
- FAX: 86-574-86303168 / 86305521
- E-mail: ytalp@yi-tong.com
|
Print this page
Send an inquiry