The AMM56219 motor driver is designed to drive both windings of a bipolar stepper motor or to control bidirectionally two DC motors. Both bridges are capable of sustaining 45V and include internal pulse-width modulation (PWM) control of the output current to 750mA. The outputs have been optimized for a low output saturation voltage drop (less than 1.8V total source plus sink at 500mA).
For PWM current control, the maximum output current is determined by the user's selection of a reference voltage and sensing resistor. Two logic-level inputs select output current limits of 0, 33%, 67%, or 100% of the maximum level. A PHASE input to each bridge determines load current direction.
The bridges include both ground clamp and fly-back diodes for protection against inductive transients. Internally generated delays prevent cross-over currents when switching current direction. Special power-up sequencing is not required. A thermal protection circuitry disables the outputs if the chip temperature exceeds safe operating limits.
The AMM56219 is supplied in a 24-lead surface-mountable SOIC. Its batwing construction provides for maximum package power dissipation in the smallest possible construction.
Specifications:
- Dual Full-Bridge PWM Motor Driver
- Features
- 1) Interchangeable with SGS L6219DS
- 2) 750mA continuous output current
- 3) 45V output sustaining voltage
- 4) Internal clamp diodes
- 5) Internal PWM current control
- 6) Low output saturation voltage
- 7) Internal thermal shutdown circuitry
- Minimum Order: Negotiable
Features:
- .Motor Driver