Product ID: FDW465

Noncontact Distributor

This noncontact distributor assembly, which deletes mechanical breaker contact, utilizes multi-function ignition core (L484) together with high performance ignition coil. Therefore it has a higher ignition voltage, higher ignition volume, as well as functions of constant ignition control, shutter control (switch on time of primary circuit), overvoltage protection, low speed & low voltage protection and power cut upon shut down. These functions are of benefit to improvement to the motive performance, economical efficiency and start up ability of engine while reduce waste exhaust.
Structure
Composed mainly of electronic ignition module assembly, distributor and ignition advance device.
Operating Conditions
Ambient operating temperature: -40℃~120℃
Operating voltage: DC6V~18v
Range of Service
Applicable to 465 carburetor gasoline engine.
Use, Installation and Maintenance
1.Align the white colored timing scale mark on engine timing gear with the position line of engine timing scale mark.
2.Open distributor lid, point the distributor head to the in-between of casing 1 and casing 2, but a little more closer to casing.
3.Insert distributor to distributor socket and make sure they are well positioned. Distributor head shall be pointed to the distributor cap casing 1. Fasten distributor with fastening bolt.
4.Use connection wiring to connect distributor educe wire to the ignition coil. Black-white wire connects ignition coil "|" and brown wire to ignition coil "-".
5.Start up engine. If there is a deviation on ignition timing, distributor can be tuned for a slight adjustment.

Certificate: TS16949

• Minimum Order: Negotiable