Zhejiang Xianfeng Machinery Factory is a large enterprise under China Weapons Industry Corporation. It was founded in 1970 and has the right to directly handle import and export business.
We are specializing in manufacture Automatic Gate Operators fifteen years in China, which are widely used for driving sliding gates for residential and industrial uses, swing gates, rolling doors for commercial and industrial usage and barrier gate system for control and management of parking lots, toll gates, good yards, railway crossing and more application.
Also manufactures and exports the following products:
PP-R pipe and Fitting & PE-AL-PE composite pipe
Multifunction military bayonets & Rife bipods
Electric gate system and No noise rolling door
Cutting wool machine
If you are interested please pay attention to our website and do not hesitate contact us.
Specifications:
- L200 sliding gate oeprator
- The L series sliding gate operators are used to drive sliding gates for residential and industrial uses. The operators can be fitted with gear wheel or chain wheel according to your needs, and featured with powerful starting strength, capable of overwork at short time. In case of power failure, an emergency release key allows operate gate manually.
- DKC400 sliding gate operator
- The DK series sliding gate operates are used to drive sliding gates for residential and industries uses. The operators can be fitted with gear wheel or chain wheel according to your needs, and featured with power starting strength, capable of overwork at short time. In case of power failure, an emergency release key allows operate gate manually.
- KJ500 rolling door operator
- The KJ500, KJ600 and KJ1000 rolling door operators are designed to drive rolling door (rolling shutter) from 500kg to 1000kg. The products featured with powerful starting strength, overworking for a short time and overheat protection when overloaded. In case of power failure, a release chain can be used to operate door manually.
- K207A swing gate operator
- The swing gate operator series are used to drive swing gates for industrial, commercial and residential uses. The biggest push power of the device is 1500N, To protect the device, an electric lock is provided to install when the width of gate leaf is more than 1.5 meters. In case of power failure, an emergency release key allows operate gate manually.
- M9 military knife
- Used as bayonet installed on rifle
- Used as a dagger
- Used as a chopper to chop, cut or split
- Can cut off wire netting or iron wire that diameter less than 4 mm
- Can saw reinforcing steel, iron bars and so on
- Can cut lighting circuit
- Can tighten up screw with the jut on the knife's sheath
- Can open pot with the point of the knife
- With an emergency honing stone on sheath
- Total weight is 0.59kg, total length is 34cm
- Advanced technical
- Advanced technical
- Advanced technical
- Advanced technical
- sharp and nice
- CE
- Minimum Order: 5 sets
- FOB: Shanghai