|
Product ID: DSL CPE
MSDSL
MSDSL is FPGA-based 2-wire 2304Kbps modem. According with ITU G.SHDSL standard, with best concocting technology and very good frequency spectrum compatibility, It has 3.5km-9.7km transmission distance in special lines with 24AWG(0.5mm) and 26 AWG(0.4mm). It can be used in every high-grade and high-speed telecom operation such as transmitting voice, data and images. It also supports N * 64Kbps rate (N=1~32) of interface of V.35 and E1(G.703). MSDSL has strong supervisory control function. You can learn from the panel the start-up, running and line malfunctioning, and so on. When the system is malfunctioning, one can locate the fault expediently with loop back test to administrate networks. The operating cost is low. Operation is simple. Installation conveniently. One can use the DIP switch on the back panel to setup work mode and transmission rate while slave modem can automatically follow master modem rate(that is the rate switch of the slave need not to work). So you can administrate the remote equipments in networks. There are many indicator LEDs on the panel to display work status and line of equipment.
|

MSDSL
|
Specifications:
- optional digital interface
- V.35 and G.703, rate support
- distance
- 3.0km-7.0transmitting distance in special lines with 24AWG(0.5mm) and 26 AWG(0.4mm)
- line rate
- ITU G.shdsl standard 2-wire 2304Kbps
- coding
- high-powered 2B1Qline coding technology is used
- two power supplying modes
- alternating current and direct current-48V
Features:
9"L*5.8"W*1.6"H
- Transmission rate
- N *64Kbps(N=3~36);V24(64K; 128K;)
- Work mode
- Line wire interface
- a pair of passive twisted-line, RJ45
- Line impedance
|
Main Product:
T1/E1 Converters/DSL CPE/Multiplexers/Bridges/Modems
|
Ordering information:
- Minimum Order: Negotiable
|
You may be interested products:
|