Fuel Pump Test Bench
Features:
Quick view the characteristic curve of governor in dynamics. Test pump with the curve of governor. Save time, save effort, rapid, audio-visual, accurate. It's a very good tool for specialist to test pump.
Computer (industrial computer work station,) measure and control. Standard computer and standard ports. Hard disk, WindowsXP operating system.
High definition, LCD monitor.
Four ways to adjust speed. Hand, digital, programmed 8-steps preset and slide.
You can set up test data of injection pump, and use it to control test bench. You can set up database of governor's curve. You can compare the test curve with the standard curve of governor.
Two control system. Computer and instruments. You can select one of them when you operate the test bench.
With protect functions for over and low voltage and short phase. Save electric power. High output torque, low fall of rotation speed. Adjusting speed quickly.
It can test both distributor ( VE ) and in-line pumps.
A/C direct driving system (no belts or gears). 100% power output without loss.
Frequency variable speed controller, high accuracy and reliability,
Automatic test oil constant temperature control, through the cooling and heating systems
Continuously variable speed control, pre-setting function
12V and 24V DC power supply
Vacuum device
Main Functions
Map and check the curve of governor (idle , part and full load ).
Checking of the advance device in dynamics.
Measurement of each cylinder's delivery at any speed.
Checking of each cylinder's injection timing with static.
Measurement of rack travel at any speed.
Checking of the LDA.
Checking of the mechanical governor.
Checking of the pneumatic governor.
Checking of the vacuum capacity of governor.
Measurement of the internal pressure of distributor pump body.
Measurement of the reflux delivery of distributor pump.
Testing of the electro-magnetic valve of distributor pump.
Checking of the transfer pump.
Checking of the sealing of injection pump body.
| Dragging power | 5.5/7.5/11/15/18.5kw | |
|---|---|---|
| Length莇idth荽eight | 2050?60?750mm | |
| Weight | 800kg-1300kg | |
| Voltage / 3 phase | 380/220V(on request) | |
| Frequency | 50/60hz | |
| Speed range | 0-4000rpm/min | |
| Speed presetting range | 0-4000rpm/min | |
| Speed control accuracy | ＜? rpm | |
| 12v External DC supply 12v | 6A | |
| 24v External DC supply 24v | 3A | |
| Center distance height | 125 mm | |
| ISO driving shaft coupling | 120 mm | |
| Measurement points | 12 cyl | |
| Graduate tubes capacity | 45/150/260ml | |
| Feeding pump | 8 L/min | |
| Oil tank capacity | 60 L | |
| Advanced angle measurement(optional) | 0-180?> | |
| Control rack travel measurement(optional) | 0-30mm | |
| Low pressure | 0-0.4mpa | |
| High pressure | 0-4 mpa | |
| Air pressure | -0.03-0.3 mpa | |
| Pump internal pressure | 0-1.6 mpa | |
| Vacuum | -0.1-0 mpa | |
| Heater power | 2 kw | |
| Fuel temperature regulation range /auto control | 30-65 ℃ | |
| Test oil cooling | Heater exchanger |
Main Products:
Engine Rebuilding,Machine Tools,Auto Maintenance,Lathe,Grinder,Metal Forming Machine,Grinding Machine,Honing Machine,Boring Machine,Measuring Instruments,Milling machine,Drilling Machine,Saws,etc.
