Kung Shin Plastics Co., Ltd. ( Ally Hospital Supply Co., Ltd. )

Sponge HME (FOR USE WITH VENITILATOR/RESPIRATOR)

Single patient use on anesthetized patients and respiratory care patients who require a breathing circuit. The product is intended to be replaced at least once every 24 hours.

Specifications:

• Temperature Output
• Vt250ml: >28°C, Vt500ml: >28°C, Vt750ml: >28°C, Vt1000ml: >28°C
• Resistance to flow(ISO 9360): 15/30/60l/min, 0.5/1.1/2.2cm H₂O
• Tidal Volume: 250 ~ 1500ml
• Dead space (connectors included - ISO 9360): 32ml
• Weight: 20g
• Patient: Adult
• Sterile: Gamma/E.O Gas

Features:

• Hygroscopic HME media traps patient's own moisture, and minimizes heat loss.
• Low air flow resistance.
• Moisture output greater than 29mg H₂O/l (ISO 9360).
• Calcium chloride treated HME media improves effectiveness.
• ISO standard 15 and 22mm fittings.
• Patient end.
• Economic type.

Certificate:

• FDA
• EN46002
• ISO 9001

Main Products:
Breathing circuit bacterial filter,Anesthesia breathing circuit, suction catheter, Heat & Moisture Condenser(HME), Copolymer Glove

• Email this page
• Bookmark this page
• Print this page