Specifications:
Features:
- Material: Galvanized steel sheet, supported by inner stainless steel plate.
- Fastening: Flanges are welded to both ends of the flexible conduit to insure electricity continuity.
- Length:
- Fixed at the middle: Total length = stroke / 2 + 4 times bending radius + 50 mm.
- Fixed at single side: Total length = stroke + 4 times bending radius + 50mm.
- Size selection: To determine interior size, a 30 ~ 40% allowance should be added to the outside diameter of the enclosed cables to prevent binding.
- Bending: It's better to choose by 8-10 times of the outside diameter of total enclosed cables for selecting the bending radius.
- Fitting: The type of A, B, S, as picture on request.
- Security guarantee should be in the limit of 60 ~ 70% of capacities, out of this limitation, it would be artificial improper disposal.
- Suggest to install the support holder to extend the life of using.
- IP50.
Others:
| Type | Outside W x H (mm) |
Inside W x H (mm) |
Min. banding radius กำ10% (mm) |
| I | 50 x 30 | 43 x 23 | 100 |
| II | 80 x 45 | 73 x 38 | 120 |
| III | 110 x 60 | 102 x 52 | 140 |
| IV | 130 x 65 | 122 x 57 | 150 |
| VI | 150 x 70 | 142 x 62 | 170 |
| VII | 170 x 80 | 162 x 72 | 200 |
Ordering information:
- Minimum Order: Negotiable
- TEL: 886-4-22780100
- FAX: 886-4-22787100
- E-mail: bliss@blissyih.com.tw