King Snaps Industrial Corp.

Send an inquiry
Rigging Hardware

Product ID: M261

Rigging Hardware

Rigging Hardware-ROPE CLIP

A wire rope clamp, also called a clip, is used to fix the loose end of the loop back to the wire rope. It usually consists of a u-shaped bolt, a forged saddle and two nuts. The two layers of wire rope are placed in the u-bolt. The saddle is then fitted over the ropes on to the bolt (the saddle includes two holes to fit to the u-bolt). The nuts secure the arrangement in place. Three or more clamps are usually used to terminate a wire rope.

Specifications:
  • M261
    • WIRE ROPE CLIP, ACCORDING TO CIN741 ZINC PLATED
  • M260
    • WIRE ROPE CLIP, USA FEDERAL SPECIFICATION ZINC PLATED
  • S260
    • WIRE ROPE CLIP, STAINLESS 316, SAME AS AMERICAN FEDERAL SPECIFICATION
  • S261
    • WIRE ROPE CLIP, LIGHT TYPE, STAINLESS 316

Main Products:
climbing hardware, safety equipment, climbing gear, climbing mountaineering, Carabiners, Climbing Carabiner, Marine Hardware, Rigging Hardware, Saddle Hardware, Safety Hook, Snap Hook, Shackle, Turnbuckle,Quick Link, Bolt, Deck Hardware, Swivel, Rigging Hardware, Terminal, Wire Rope Clip, Wire Rope

Send an inquiry

Contact Details

CEO: Mr. L. C. Chiang
Sales Contact: Manager L. C. Chiang
Minimum Order:Negotiable
Address:16F-2, No. 51, Sec.2, Keelung Road Taipei, 11052 Taiwan
Tel:886-2-27393669
Fax:886-2-27393198, 27359338