King Snaps Industrial Corp.

Send an inquiry
Rigging Hardware - Terminal

Product ID: S7802

Rigging Hardware - Terminal

Rigging Hardware-terminal

Swaging is a method of wire rope termination that refers to the installation technique. The purpose of swaging wire rope fittings is to connect two wire rope ends together, or to otherwise terminate one end of wire rope to something else. A mechanical or hydraulic swager is used to compress and deform the fitting, creating a permanent connection. There are many types of swaged fittings. Threaded Studs, Ferrules, Sockets, and Sleeves a few examples.
Eye Terminal, Lost Wax, AISI 316.


Main Products:
climbing hardware, safety equipment, climbing gear, climbing mountaineering, Carabiners, Climbing Carabiner, Marine Hardware, Rigging Hardware, Saddle Hardware, Safety Hook, Snap Hook, Shackle, Turnbuckle,Quick Link, Bolt, Deck Hardware, Swivel, Rigging Hardware, Terminal, Wire Rope Clip, Wire Rope

Send an inquiry

Contact Details

CEO: Mr. L. C. Chiang
Sales Contact: Manager L. C. Chiang
Minimum Order:Negotiable
Address:16F-2, No. 51, Sec.2, Keelung Road Taipei, 11052 Taiwan
Tel:886-2-27393669
Fax:886-2-27393198, 27359338