Rigging Hardware - Turnbuckle
King Snaps Industrial Corp. is a highly-qualified, Taiwan-based supplier and manufacturer of Riggers, Marine Hardware, and Turnbuckle. The supplier has been recognized as one of the most professional manufacturers in the industry since 1985. With both experience and innovation, the supplier is confident of providing buyers with quality Riggers.
A turnbuckle is a device for adjusting the tension of ropes, cables and tie rods. It normally consists of two threaded eyelets, one screwed into each end of a small metal loop, one with a left-hand thread and the other with a right-hand thread. The tension can be adjusted by rotating the loop, which causes both eyelets to be screwed in or out simultaneously. Turnbuckles are most commonly used in applications which require a great deal of tension; they can range in mass from about ten grams for thin cable used in a garden fence, to thousands of kilograms for structural elements in buildings and suspension bridges. This device is also known as a bottlescrew and is used on ships for tensioning rigging and lashings.
D shackle, stainless 316, screw pin.
Main Products:
climbing hardware, safety equipment, climbing gear, climbing mountaineering, Carabiners, Climbing Carabiner, Marine Hardware, Rigging Hardware, Saddle Hardware, Safety Hook, Snap Hook, Shackle, Turnbuckle,Quick Link, Bolt, Deck Hardware, Swivel, Rigging Hardware, Terminal, Wire Rope Clip, Wire Rope
