Product ID: W220

Control Arm - Mercedes Benz

The standard production methods are:
Stamping form sheet-metal or coils, or hot forging from steel or a hardening forging aluminium alloy.
Suspension arms must have low weight, and must have bucking and bending resistance and long life under the impact of lateral, starting and braking forces.

Application reference:
1. Vertical end movement to be 0.05 ~ 0.25 mm when socket is supported on surface "z" with a 280kg. Lord in direction "y".
2. Torque stud nuts to 100 - 125 ft. lbs. At assembly onto the vehicle, continue tightening (do not back off) to align the nut slot with the cotter hole to permit assembly of the cotter pin.
3. Ball stud designed for 23mm arm thickness with a 16.5mm gage diameter at small end of taper.

Click here for details.

• W220(S)
• T.G.Q. No.: 888 191
• OEM No.: 220 330 14 07, 220 330 83 07, 220 330 94 07
• I/POS: Front Up LH
• Vehicle: W220(S)
• T.G.Q. No.: 888 192
• OEM No.: 220 330 15 07, 220 330 84 07, 220 330 93 07
• I/POS: Front Up RH
• Vehicle: 1999~
• W220(S)
• T.G.Q. No.: 888 207
• OEM No.: 220 330 04 05, 220 330 17 11, 220 330 43 11
• I/POS: Front Low LH
• Vehicle: W220(S)
• T.G.Q. No.: 888 208
• OEM No.: 220 330 05 05, 220 330 18 11, 220 330 44 11
• I/POS: Front Low RH
• Vehicle: 1999~
• W220(S)
• T.G.Q. No.: 888 217
• OEM No.: 220 330 25 07, 220 330 78 07
• I/POS: Front Low LH
• Vehicle: W220(S)
• T.G.Q. No.: 888 218
• OEM No.: 220 330 24 07, 220 330 77 07
• I/POS: Front Low RH
• Vehicle: 1999~
• W220(S)
• T.G.Q. No.: 888 229
• OEM No.: 215 330 07 07
• I/POS: Front Low R/L
• Vehicle: W220(S) 1999~

• Minimum Order: Negotiable
• TEL: 886-4-26398118
• FAX: 886-4-26396887
• E-mail: tgq.motor@msa.hinet.net