The standard production methods are:
Stamping form sheet-metal or coils, or hot forging from steel or a hardening forging aluminium alloy.
Suspension arms must have low weight, and must have bucking and bending resistance and long life under the impact of lateral, starting and braking forces.
Application reference:
1. Vertical end movement to be 0.05 ~ 0.25 mm when socket is supported on surface "z" with a 280kg. Lord in direction "y".
2. Torque stud nuts to 100 - 125 ft. lbs. At assembly onto the vehicle, continue tightening (do not back off) to align the nut slot with the cotter hole to permit assembly of the cotter pin.
3. Ball stud designed for 23mm arm thickness with a 16.5mm gage diameter at small end of taper.
Specifications:
- 7 Series(E65)
- T.G.Q. No.: 168 137
- OEM No.: 31 12 6 755 835
- I/POS: Front Low LH
- Vehicle: 7 Series(E65)
- T.G.Q. No.: 168 138
- OEM No.: 31 12 6 755 836
- I/POS: Front Low RH
- Vehicle: 2001~
- 7 Series(E65)
- T.G.Q. No.: 168 141
- OEM No.: 31 12 4 026 453
- I/POS: Front Up LH
- Vehicle: 7 Series(E65)
- T.G.Q. No.: 168 142
- OEM No.: 31 12 4 026 454
- I/POS: Front Up RH
- Vehicle: 2001~
- X5(E53)
- T.G.Q. No.: 168 157
- OEM No.: 31 12 6 760 275
- I/POS: Front Low LH
- Vehicle: X5(E53)
- T.G.Q. No.: 168 158
- OEM No.: 31 12 6 760 276
- I/POS: Front Low RH
- Vehicle: 2000~
- X5(E53)
- T.G.Q. No.: 168 161
- OEM No.: 31 12 1 096 169
- I/POS: Front Up LH
- Vehicle: X5(E53)
- T.G.Q. No.: 168 162
- OEM No.: 31 12 1 096 170
- I/POS: Front Up RH
- Vehicle: 2000~
- Minimum Order: Negotiable
- TEL: 886-4-26398118
- FAX: 886-4-26396887
- E-mail: tgq.motor@msa.hinet.net