auto control arm
The standard production methods are:
Stamping form sheet-metal or coils, or hot forging from steel or a hardening forging aluminium alloy.
Suspension arms must have low weight, and must have bucking and bending resistance and long life under the impact of lateral, starting and braking forces.
Application reference:
1. Vertical end movement to be 0.05 ~ 0.25 mm when socket is supported on surface "z" with a 280kg. Lord in direction "y".
2. Torque stud nuts to 100 - 125 ft. lbs. At assembly onto the vehicle, continue tightening (do not back off) to align the nut slot with the cotter hole to permit assembly of the cotter pin.
3. Ball stud designed for 23mm arm thickness with a 16.5mm gage diameter at small end of taper.
Specifications:
- T.G.Q. No.: 558 061
- OEM No.: 51469-SE0-000, 51469-SE0-003
- I/POS: Front Up LH
- Vehicle: Accord III (CA4, CA5)
- T.G.Q. No.: 558 062
- OEM No.: 51459-SE0-000, 51459-SE0-003
- I/POS: Front Up RH
- Vehicle: 1985~1989
- T.G.Q. No.: 558 079
- OEM No.: 52390-SE0-023, 52390-SE0-043
- I/POS: Rear Up R/L
- Vehicle: Accord III (CA4, CA5), 1985~1989
- T.G.Q. No.: 558 081
- OEM No.: 51460-SM4-013, 51460-SM4-A03
- I/POS: Front Up LH
- Vehicle: Accord IV (CB3, CB7), Accord V (CC7), Rover 600RH
- T.G.Q. No.: 558 082
- OEM No.: 51450-SM4-013, 51450-SM4-A03
- I/POS: Front Up RH
- Vehicle: 1990~1993, 1993~1996, 1993~1999
- T.G.Q. No.: 558 097
- OEM No.: 51360-ST7-010, 51360-SR3-020, 51360-SR3-A02
- I/POS: Front Low LH
- Vehicle: Civic IV (EG, EH), CRX II (ED, EE), Acura Integra
- T.G.Q. No.: 558 098
- OEM No.: 51350-ST7-010, 51350-SR3-020, 51350-SR3-A02
- I/POS: Front Low RH
- Vehicle: 1991~1995, 1992~1998, 1994~2001
- T.G.Q. No.: 558 101
- OEM No.: 51460-S84-A01
- I/POS: Front Up LH
- Vehicle: Accord VII (CG)
- T.G.Q. No.: 558 102
- OEM No.: 51460-S84-A01
- I/POS: Front Up RH
- Vehicle: 1998~2003
- Minimum Order: Negotiable
- TEL: 886-4-26398118
- FAX: 886-4-26396887
- E-mail: tgq.motor@msa.hinet.net