Dry Laminating MachinesClick here for details.
Product ID: DL-1000/1300Send Inquiry
Dry Laminating Machines Description:
- for Plastic Laminating
- for flexible Packaging Converting.
AIR SHAFT TYPE REWINDER
| SMOOTHING ROLL
．The smoothing roll is operated by air cylinder.
．An indexing handle provides micrometric adjustment of contact. Contact position
is displayed easily.
．Smoothing roll features synchronized motion with pressure roll raising and is
separated by material.
| CHAMBER DOCTOR SYSTEM
．No glue splashing during high speed operation.
．Minimum solvent odor.
．Easy to install and clean.
．Minimum variation of liquid viscosity.
．Long service life of doctor blade.
|OPEN DOCTOR BLADE SYSTEM|
| DOUBLE-LAYER GLUE TANK
．The outer layer is equipped with an air suction device for sucking the solvent smell, which avoids odor splashing.
| SLEEVE TYPE COATING IMPRESSION ROLLER
．The sleeve type coating impression roller is fast to change to suit various material widths.
| INDIVIDUAL MOTOR DRIVE
．The coating rubber roller and the glue-coating mesh roller are driven by individual motors which avoids uneven coating resulting from slipping between the gluing roller and the material.
| DRYING MECHANISM
．The drying mechanism has 3 zones with a total length of 8.1 meters.
．The No. 1 zone located at the right employs V shaped nozzles for uniform hot
．The No. 2 and No. 3 zones are located at the left and employ multi-holes board
for high efficiency drying.
|Machine speed||200 M/min|
|Working speed||180 M/min|
|Laminating material||All kinds of web|
|Drying system||Electric heater (Gas, steam or thermal oli as optional) 1350mm|
|Drying tunnel length||2.7M x3 sections (8.1M)|
|Guide roller for drying tunnel||Ø90 mm, surface chrome plated. Driven by timing belt.|
|Coating system||Gravure type, individual motor drive|
|Adhesive pan||Stainless steel double-layer type (outer layer can absorb solvent smell)|
|Laminating roller||Mirror-effect treated, hot oil circulation|
|Max. unwind diameter||600mm|
|Max. rewind diameter||800mm|
|I.D. for rewind paper core||75mm (3")|
|Unwind material fixed method||Air shaft|
|Rewind material fixed method||Air shaft|
|Guide roller type||Ø120mm., center type, Hard chrome coating|
|max. material width||1100mm||1350mm|
|Coating roller width||1200mm||1400mm|
|Coating width range||400-1050mm||400-1300mm|
|Drying blower||3HP x 3 sets||5HP x 3sets|
|Exhaust blower as optional||10HP||15HP|
Slitting Machines, Rewinding Machines, Proofing Machine, Dry and Solventless Laminating Machine and Shrink Sleeve Converting Machinery