Specifications:
- Communication port: MINI DIN 3P, RS-232 port
- Memory: 7K Bytes
- Size:
- 19.6(L) x 10.0(W) x 4.0(H)(Cm), 7.7(L) x 3.9(W) x 1.6(H)(In)
- Weight: Unit is 0.45kg(0.99Lb) and shipping is 2.75kg(6.06Lb)
- Powering:
- 8 hours(typ.): Continuous use for power meter and light source both
- 12 hours(typ.): Continuous use for power meter only
- 5 hours(typ.); Charging time for a full discharged
- Continuous: Using AC Adapter
- Temperature:
- Operation: 0~50 Celsius
- Storage: -10~60 Celsius
- Humidity: 0 to 95%(Non-condensing)
- Standard accessories: Instruction manual, Ni-MH battery, one fiber adapter, carrying case, certificate of calibration, AC adapter, rubber bumper
- Splicing test:
- Fiber acceptance testing
- Connectorization loss test
- Attenuation measurements using CW output mode
- Source for fiber identifiers using 2KHZ, 1KHZ, 330KHZ, 270KHZ modulation mode
- Optical fiber installation for Long-Haul, Telecom, CATV
Features:
- Measurements made at 23+/-2 Celsius unless otherwise specified
- The optical dynamic range is measured in Hi level by 9/125Mu m optical fiber with FC Connector
- At 23+/-2 Celsius after a 20-minute warm-up period for 1 hour testing
- At 23+/-2 Celsius after a 20-minute warm-up period for 8 hours testing
- For temperature variation from 0~50 Celsius
- Other connector types or specification can be provided on special request
- Report printing and down load file via a RS-232 port
- Up to 2500 loss measurement data storage
- Battery-low and battery charge status indicator
- One-touch selection of relative or absolute power level
- Auto ranging detect 2KHZ, 1KHZ, 330HZ, 270HZ
- Self-test each time after power on
- Dual wavelength via single one output
- Auto-off function for saving battery
- Automatic data acquisition for a long time testing
- RITEST file management software for reporting and on-line monitoring
- Peak-value display function with on/off toggle key
- Adjustable for 1-20 sample average value readout
Others:
| Item \ Model | FTM-510 | FTM-520 | FTM-530 | FTM-540 | |
|---|---|---|---|---|---|
| Sensor type | Ge | Ge | inGaAs | Ge | |
| Spectral range | 800 to 1800mm | 800 to 1800mm | 800 to 1800mm | 800 to 1800mm | |
| Measuring range | +3 to -70dBm | +23 to -50dBm | +3 to -70dBm | +16 to -60dBm | |
| Auto detection | CW, 2KHZ, 1KHZ, 330KHZ, 270KHZ | CW, 2KHZ, 1KHZ, 330KHZ, 270KHZ | CW, 2KHZ, 1KHZ, 330KHZ, 270KHZ | CW, 2KHZ, 1KHZ, 330KHZ, 270KHZ | |
| Accuracy | +/-102(+/-5%)dB | +/-102(+/-5%)dB | +/-102(+/-5%)dB | +/-102(+/-5%)dB | |
| Unit | dB, dBm, Mw, Mu W, Nw | dB, dBm, Mw, Mu W, Nw | dB, dBm, Mw, Mu W, Nw | dB, dBm, Mw, Mu W, Nw | |
| Calibration | 820nm, 850nm, 1300nm, 1310nm, 1150nm | 820nm, 850nm, 1300nm, 1310nm, 1150nm | 820nm, 850nm, 1300nm, 1310nm, 1150nm | 820nm, 850nm, 1300nm, 1310nm, 1150nm | |
| Connector type | FC, ST, SMA, D4, SC, Bionic | FC, ST, SMA, D4, SC, Bionic | FC, ST, SMA, D4, SC, Bionic | FC, ST, SMA, D4, SC, Bionic | |
| Item \ Model | 01 | 02 | 03 | 04 | |
| Emitter type | Laser diode | Laser diode | Laser diode | Laser diode | |
| Wavelength | 1310+/-20nm | 1550+/-20nm | 1310/1550+/-20nm | 1310/1550+/-20nm | |
| FWHM | 5nm or less than 5nm | 5nm or less than 5nm | 5nm or less than 5nm | 5nm or less than 5nm | |
| Output power(9/125Mu m) | -6.0dBm or more than -6.0dBm | -6.5/-6.5dBm or more than -6.5/-6.5dBm | -6.5/-6.5dBm or more than -6.5/-6.5dBm | -3dBm or more than -3dBm | |
| Output level | Hi, Mid, Low | Hi, Mid, Low | Hi, Mid, Low | Hi, Mid, Low | |
| Modulation mode | CW, 2KHZ, 1KHZ, 330HZ, 270HZ | CW, 2KHZ, 1KHZ, 330HZ, 270HZ | CW, 2KHZ, 1KHZ, 330HZ, 270HZ | CW, 2KHZ, 1KHZ, 330HZ, 270HZ | |
| Output stability(1/8HRS) | +/-0.05Db/+/-0.1Db | +/-0.05Db/+/-0.1Db | +/-0.05Db/+/-0.1Db | +/-0.05Db/+/-0.1Db | |
| Connector type | FC, ST, SMA, D4, SC, Bionic | FC, ST, SMA, D4, SC, Bionic | FC, ST, SMA, D4, SC, Bionic | FC, ST, SMA, D4, SC, Bionic | |
| Temperature stability | +/-0.02dBm/Celsius | +/-0.02dBm/Celsius | +/-0.02dBm/Celsius | +/-0.02dBm/Celsius |
Ordering information:
- Minimum Order: Negotiable
- FOB: Taiwan